A&P mechanic privileges and limitations
A certificated mechanic may perform or supervise maintenance, preventive maintenance and alterations within their rating, and approve that work for return to service, except major repairs and major alterations (14 CFR 65.85, 65.87). A mechanic may not do major repairs or major alterations of propellers or any repair or alteration of instruments (65.81). Airframe and powerplant ratings each allow the 100-hour inspection in their area; an annual inspection, and approval after a major repair or alteration, need an inspection authorization (65.95).
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-11); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
Who can approve what?
| Task | Airframe rating | Powerplant rating | IA holder |
|---|---|---|---|
| Approve own or supervised work (not major) for return to service | Airframe and related parts | Powerplant, propeller and related parts | Yes, within the ratings held |
| 100-hour inspection required by part 91 | Airframe | Powerplant and propeller | Yes |
| Annual inspection | No | No | Yes |
| Approve after a major repair or major alteration | No (may do the work) | No (may do the work) | Yes, with FAA-approved data, except aircraft on a part 121 continuous airworthiness program |
| Perform a major repair or major alteration of a propeller | Not within mechanic privileges (65.81(a)) | ||
| Perform any repair or alteration of instruments | Not within mechanic privileges (65.81(a)) | ||
Sources: 65.81, 65.85, 65.87, 65.95. A light-sport exception lets A&P mechanics approve certain manufacturer-authorized major repairs and alterations on special light-sport aircraft (65.85(b) and 65.87(b), amended in July 2025).
What limits apply even inside my rating?
- Done it before. You may not supervise or approve a job you have not satisfactorily performed before, unless you show the ability to the FAA or do it under the direct supervision of a certificated mechanic or repairman experienced in that operation (65.81(a)).
- Current instructions. You must understand the manufacturer's current instructions and maintenance manuals for the job (65.81(b)).
- Recent experience. In the last 24 months you need at least 6 months serving as a mechanic, supervising mechanics, or supervising maintenance in an executive capacity, or an FAA finding that you can do the work (65.83).
- Address. Tell the FAA Airman Certification Branch in writing within 30 days of moving your permanent mailing address (65.21).
What goes in the logbook?
For maintenance and alterations: a description of the work (or a reference to acceptable data), the completion date, the name of the person who did it if different, and the approving person's signature, certificate number and kind of certificate (14 CFR 43.9). For inspections: the type and extent of inspection, date and total time, signature and certificate details, and the airworthy statement or a list of discrepancies given to the owner (14 CFR 43.11).
Free mini quiz: 8 practice questions
Eight questions on privileges, inspections and approvals (ACS areas AM.I.I, AM.II.D and AM.III.C). These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.I.I.K1 g4-001
A mechanic holding airframe and powerplant ratings, but no inspection authorization, completes a minor repair to a cabin door hinge using the manufacturer's maintenance manual. Who may approve this work for return to service?
- Only a mechanic who also holds an inspection authorization
- The mechanic who did it, by making the required record entry
- Only an FAA inspector, after examining the finished repair in person
Show answer
Answer: B. Under 14 CFR 65.85, an airframe-rated mechanic may approve and return to service work they performed, supervised or inspected, except major repairs and major alterations. A minor repair is within that privilege; an inspection authorization is needed only to approve major repairs and alterations.
Source: 14 CFR 65.85; 14 CFR 43.7
AM.I.I.K1 g4-002
An A&P mechanic without an inspection authorization completes a major repair to a wing spar using FAA-approved data. What is the mechanic's role regarding return to service?
- The mechanic may do the work, but an IA or other authorized person must approve it
- The mechanic may approve the return to service, because the repair data was FAA-approved
- The mechanic may approve it once a second A&P mechanic inspects and countersigns the entry
Show answer
Answer: A. 14 CFR 65.85 excludes major repairs and major alterations from the mechanic's return-to-service privilege. Under 65.95 an inspection authorization holder (or another authorized person such as a suitably rated repair station) approves it. Approved data is required for the work but does not change who may approve it.
Source: 14 CFR 65.85; 14 CFR 65.95
AM.I.I.K1 g4-003
A powerplant-rated mechanic is asked to straighten a bent aluminum propeller blade, which 14 CFR Part 43 Appendix A lists as a major propeller repair. What does 14 CFR 65.81 allow?
- The mechanic may perform it if an IA inspects it and approves the return to service
- The mechanic may not perform it, because 65.81 excludes major propeller repairs
- The mechanic may perform it, because the powerplant rating includes propellers
Show answer
Answer: B. 14 CFR 65.81(a) excludes major repairs to, and major alterations of, propellers from a mechanic's privileges, so the work goes to an appropriately rated propeller repair station. The powerplant rating covers propellers only for work that is not a major repair or alteration, and an IA cannot extend what the mechanic may do.
Source: 14 CFR 65.81; 14 CFR Part 43 Appendix A
AM.I.I.K1 g4-004
An experienced A&P mechanic has never adjusted a particular type of cable tension regulator. Under 14 CFR 65.81, how can the mechanic become able to approve that job for return to service?
- By doing it under the direct supervision of a rated person experienced in that operation
- By reading the maintenance manual procedure carefully before doing it alone the first time
- By having an inspection authorization holder countersign the first maintenance record entry
Show answer
Answer: A. 14 CFR 65.81(a) bars a mechanic from approving work not satisfactorily performed before, unless ability is shown by doing it to the FAA's satisfaction or under direct supervision of a certificated, appropriately rated mechanic or repairman with previous experience in that operation. Reading the manual is required by 65.81(b) but is not enough on its own.
Source: 14 CFR 65.81
AM.I.I.K1 g4-005
Which inspection may a mechanic who holds only an airframe rating perform and approve for return to service?
- A 100-hour inspection of an airframe and its related parts
- An annual inspection of the complete airframe
- The inspection that approves a major alteration for return to service
Show answer
Answer: A. 14 CFR 65.85(a) lets an airframe-rated mechanic perform the 100-hour inspection required by part 91 on an airframe and related parts and approve it for return to service. Annual inspections and approval after major alterations require an inspection authorization under 65.95.
Source: 14 CFR 65.85; 14 CFR 65.95
AM.II.D.K1 a2-037
Who may perform an annual inspection on a privately owned single-engine airplane and approve it for return to service?
- Any mechanic with airframe and powerplant ratings
- A mechanic holding an inspection authorization
- The owner, if the owner holds a private pilot certificate
Show answer
Answer: B. Under 14 CFR 65.95 an annual inspection must be performed and approved by a mechanic holding an inspection authorization (or by an appropriately rated repair station or the manufacturer). A mechanic with A&P ratings but no IA may do a 100-hour inspection, not an annual. A pilot owner may do only listed preventive maintenance.
Source: 14 CFR 65.95; 14 CFR 91.409(a)
AM.III.C.K1 p2-004
Under 14 CFR 65.95, what additional authority must a certificated mechanic hold to perform an annual inspection and approve the aircraft for return to service?
- An inspection authorization
- A repairman certificate for that make of aircraft
- Airframe and powerplant ratings used within the preceding 24 months
Show answer
Answer: A. Section 65.95 gives the holder of an inspection authorization the privilege to perform annual inspections and approve the aircraft for return to service. A mechanic with airframe and powerplant ratings and current recent experience may do 100-hour inspections but not approve an annual.
Source: 14 CFR 65.95; 14 CFR 43.7
AM.I.I.K4 g4-011
A mechanic finishes a 100-hour inspection and finds the airplane airworthy. Which statement does 14 CFR 43.11 call for in the record entry?
- A statement that the aircraft was returned to service, without naming the type of inspection
- A statement that the manufacturer's checklist was followed and that no parts were replaced
- A certification that it was inspected per the named inspection type and found airworthy
Show answer
Answer: C. 14 CFR 43.11(a) requires the entry to name the type of inspection and include the statement, or similar wording, 'I certify that this aircraft has been inspected in accordance with (type) inspection and was determined to be in airworthy condition.' A generic return-to-service line omits the inspection type and the airworthiness finding.
Source: 14 CFR 43.11
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- Can an A&P do an annual inspection?
- Not without an inspection authorization. An A&P may do the 100-hour inspection in their rating; the annual needs an IA (or an appropriately rated repair station or the manufacturer).
- Can an A&P do a major repair?
- Yes, the work itself, within the rating. Approving it for return to service needs an IA or another authorized person, and the work needs FAA-approved data and a Form 337.
- Does my certificate expire if I stop working?
- No, but without 6 months of mechanic work in the last 24 you cannot use its privileges until you rebuild that experience or the FAA finds you able to do the work (14 CFR 65.83).
Sources
- 14 CFR 65.81, general privileges and limitations. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.83, recent experience requirements. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.85, airframe rating: additional privileges. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.87, powerplant rating: additional privileges. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.95, inspection authorization: privileges and limitations. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.21, change of address. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 43.9, maintenance record entries. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 43.11, inspection record entries. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.