Inspection Authorization (IA) requirements
To get an IA you must have held a mechanic certificate with both airframe and powerplant ratings for at least 3 years, have been actively maintaining aircraft for the 2 years before you apply, have a fixed base of operations and access to the equipment, facilities and inspection data needed, and pass the FAA IA knowledge test (14 CFR 65.91). Every IA expires on March 31 of each odd-numbered year, and renewal needs one qualifying activity in each year, such as annual inspections, major repairs, a progressive inspection, an 8-hour refresher course or an oral test (65.92, 65.93).
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-11); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
Who is eligible?
| Requirement | Detail |
|---|---|
| Certificate | Mechanic certificate with both airframe and powerplant ratings, each in effect for a total of at least 3 years |
| Recent activity | Actively engaged in maintaining aircraft for at least the 2 years before applying |
| Fixed base | A place where you can be reached in person or by phone during the normal work week (it need not be where you inspect) |
| Resources | Equipment, facilities and inspection data to inspect airframes, powerplants, propellers and related parts |
| Test | Pass the IA written test on inspecting for return to service after major repairs and alterations and on annual and progressive inspections |
Source: 14 CFR 65.91(c).
What is the IA test like?
You apply on FAA Form 8610-1 at your Flight Standards office; an FAA inspector endorses the form, which is your authorization to test. The FAA testing matrix lists the IA test (code IAR) at 50 questions, 3.0 hours, a 70% passing score and a minimum age of 21, given only at centers authorized for it, with the supplement FAA-CT-8080-8D. After a failure you must wait at least 90 days and bring a newly endorsed Form 8610-1 with the failed report (testing matrix, revised September 25, 2026; 65.91(c)(5)). The FAA's IA Information Guide is the study reference for the inspection and approval procedures.
What can an IA do that an A&P cannot?
- Inspect and approve for return to service an aircraft or part after a major repair or major alteration done with FAA-approved data (not aircraft on a part 121 continuous airworthiness program).
- Perform annual inspections, and perform or supervise progressive inspections.
An IA must keep the authorization available to show the owner, the mechanic submitting the work and the FAA, and must notify the Flight Standards office in writing before using it after moving their fixed base (65.95).
How does IA renewal work?
All IAs expire March 31 of odd-numbered years. You renew in March of the odd year at your Flight Standards office by showing you still meet the eligibility items, and by having completed one of these activities by March 31 of the first year and again during the second year (65.93(a)):
| Option | Activity |
|---|---|
| 1 | At least one annual inspection for each 90 days you held the authority |
| 2 | At least two major repairs or major alterations for each 90 days |
| 3 | At least one progressive inspection performed or supervised and approved |
| 4 | A refresher course of at least 8 hours acceptable to the FAA |
| 5 | An oral test by an FAA inspector |
Miss the first-year activity and you may not use the IA after March 31 of that year until you pass an oral test from an FAA inspector (65.93(c)). An IA also stops being effective if you lose your fixed base or the required equipment and data (65.92(b)).
Free mini quiz: 8 practice questions
Eight questions on inspections, major repairs and Form 337, the core of IA work. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.II.D.K1 a2-035
An annual inspection on a privately operated airplane was completed and signed off on March 10, 2026. Without another annual inspection, through what date may the airplane be operated?
- March 10, 2027
- February 28, 2027
- March 31, 2027
Show answer
Answer: C. 14 CFR 91.409(a) requires an annual inspection within the preceding 12 calendar months, and a calendar month ends on its last day. An inspection done any day in March 2026 stays current through March 31, 2027. Counting to the same date (March 10) ignores the calendar-month rule.
Source: 14 CFR 91.409(a)
AM.II.D.K1 a2-036
A rental airplane's 100-hour inspection is due at 1,450.0 hours. With approval to fly to a shop that can do the work, it arrives and is inspected at 1,456.0 hours. When is the next 100-hour inspection due?
- 1,550.0 hours
- 1,556.0 hours
- 1,560.0 hours
Show answer
Answer: A. The 100-hour limit may be exceeded by up to 10 hours only to reach a place where the inspection can be done, and the excess time counts toward the next interval. Next due = 1,450 + 100 = 1,550 hours. Adding 100 to the actual inspection time (1,556) wrongly gives the 6 hours back.
Source: 14 CFR 91.409(b)
AM.II.D.K1 a2-039
A rental airplane on 100-hour inspections receives an annual inspection at 1,512 hours. When is the next 100-hour inspection due?
- At the old 100-hour due time, because the two inspections are tracked separately
- At 1,612 hours only if the annual was performed by a repair station
- At 1,612 hours, because the annual inspection may be used in place of a 100-hour
Show answer
Answer: C. An annual inspection covers the same scope and may substitute for a 100-hour inspection, so the 100-hour clock restarts at 1,512 hours. A 100-hour inspection cannot substitute for an annual, but the reverse is allowed. Who performs the annual makes no difference to that credit.
Source: 14 CFR 91.409(b)
AM.I.I.K4 g4-012
An IA completes an annual inspection, finds three discrepancies, and gives the owner a signed and dated list. Another A&P mechanic later repairs all three items, none of which is a major repair. What returns the airplane to service?
- A new annual inspection by the same IA after all three repairs are done
- A second annual inspection by any IA once the repairs are complete
- The second mechanic's record entries for the repairs
Show answer
Answer: C. The annual inspection was completed and recorded as not approved, with the discrepancy list given to the owner (14 CFR 43.11). Any appropriately rated person may correct listed discrepancies and approve that work for return to service under 43.9; the inspection does not have to be repeated. An IA is needed only if a correction is a major repair or alteration.
Source: 14 CFR 43.11; 14 CFR 43.9; 14 CFR 65.85
AM.II.D.K2 a2-042
A mechanic completes a major repair on a wing spar using approved data and fills out FAA Form 337. What is done with the copies?
- The owner gets the signed original and a copy goes to the FAA within 48 hours
- The mechanic keeps the original and mails a copy to the FAA within 30 days
- The original goes to the FAA within 48 hours and the owner keeps no copy
Show answer
Answer: A. Part 43 Appendix B requires the signed original Form 337 to be given to the aircraft owner and a duplicate to be sent to the FAA (normally the local Flight Standards office) within 48 hours after approval for return to service. The owner keeps the original as part of the aircraft records.
Source: 14 CFR part 43, Appendix B
AM.I.I.K7 g4-017
According to the 14 CFR Part 1 definition, what makes a repair a major repair?
- It takes more than a set number of labor hours to complete, as listed in the maintenance manual
- Its parts and labor cost exceeds a set percentage of the aircraft's current market value
- If done improperly, it might appreciably affect airworthiness, such as strength or balance
Show answer
Answer: C. 14 CFR 1.1 defines a major repair as one that, if improperly done, might appreciably affect weight, balance, structural strength, performance, powerplant operation, flight characteristics, or other qualities affecting airworthiness, or one not done by accepted practices or elementary operations. Labor time and cost are not part of the definition.
Source: 14 CFR 1.1
AM.I.I.K7 g4-018
A mechanic is unsure whether a planned repair is major or minor. Who is responsible for making that classification?
- The local Flight Standards office, which must classify every repair before work starts
- The aircraft owner, because the owner is primarily responsible for airworthiness under 91.403
- The person doing the work, using Part 43 Appendix A and asking the FAA if needed
Show answer
Answer: C. The person doing and approving the work classifies it, using the Part 1 definitions and the examples in Part 43 Appendix A, and may ask the FAA for help when in doubt. The FAA does not pre-classify every repair, and although the owner is responsible for airworthiness under 91.403, the classification is a technical call by the maintainer.
Source: FAA-H-8083-30B, Regulations, Maintenance Forms, Records, and Publications; 14 CFR Part 43 Appendix A
AM.I.I.K7 g4-019
Which job does 14 CFR Part 43 Appendix A list as a major airframe repair?
- Replacing a hydraulic hose with an identical new part
- Splicing a wing spar
- Making a small fabric patch that needs no rib stitching
Show answer
Answer: B. Part 43 Appendix A lists repairs involving strengthening, reinforcing, splicing, or manufacturing of primary structural members such as spars as major repairs. Replacing a hose with an identical part is minor, and a small fabric patch not needing rib stitching or removal of structure is on the preventive maintenance list.
Source: 14 CFR Part 43 Appendix A
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- When does the next IA renewal happen?
- Every IA expires on March 31 of an odd-numbered year (14 CFR 65.92), so the next one is March 31, 2027, with renewal in March 2027.
- Does the IA depend on my mechanic certificate?
- Yes. You may use an IA only while you hold a currently effective mechanic certificate with both a currently effective airframe rating and a currently effective powerplant rating (14 CFR 65.92(a)).
- Is there a Rivetry IA question bank?
- No. Rivetry covers the General, Airframe and Powerplant tests. The questions below practice the inspection and major repair rules that IA work builds on.
Sources
- 14 CFR 65.91, inspection authorization. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.92, inspection authorization: duration. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.93, inspection authorization: renewal. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.95, inspection authorization: privileges and limitations. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- FAA Airman Knowledge Testing Matrix (revised September 25, 2026): AMT and IA pages. FAA. Read 2026-11-11.
- FAA-G-8082-19, Inspection Authorization Information Guide (with Change 1, July 19, 2024). FAA. Read 2026-11-11.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.