How to get your A&P mechanic certificate
You must be at least 18, able to read, write, speak and understand English, and qualify either through an FAA-certificated Part 147 aviation maintenance technician school or through documented practical experience: 18 months for one rating, or 30 months working on both airframes and powerplants at the same time (14 CFR 65.71 and 65.77). Then you pass the written tests for the ratings you want and an oral and practical test with a Designated Mechanic Examiner, all within 24 months.
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-11); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
What are the FAA requirements for an A&P certificate?
The FAA issues one mechanic certificate with an Airframe rating, a Powerplant rating, or both ("A&P"). You do not have to get both. The rules are in 14 CFR part 65, subpart D.
| Requirement | What the rule says | Rule |
|---|---|---|
| Age | At least 18 years old | 65.71(a)(1) |
| English | Read, write, speak and understand English. An applicant employed outside the US by a US air carrier who does not meet this can get a certificate endorsed "Valid only outside the United States". | 65.71(a)(2) |
| Experience | An authenticated document from a Part 147 school, or 18 months of practical experience for one rating, or 30 months concurrently doing both airframe and powerplant work | 65.77 |
| Written tests | Pass the written test for each rating sought, after meeting the experience requirement; minimum passing grade 70% | 65.75, 65.17 |
| Oral and practical | Pass an oral test and a practical test on the ACS knowledge, risk management and skill elements | 65.79 |
| Time limit | Pass all the prescribed tests within 24 months | 65.71(a)(3) |
No medical certificate is needed, and the FAA sets no general education requirement, although most Part 147 schools ask for a high school diploma or GED (FAA mechanic FAQ; FAA experience page).
School, experience or military: which route fits you?
| Route | What you show | Your authorization to test |
|---|---|---|
| Part 147 school (AMTS) | Graduation document from the school (14 CFR 147.21). The FAA says most schools take 18 to 24 months, depending on the ratings. | The school's authenticated graduation document |
| Civilian experience (OJT) | 18 months per rating or 30 months for both, counted on a full-time 40-hour week, documented with pay records or logs signed by a certificated supervisor that show hours, tasks and aircraft registration numbers | FAA Form 8610-2 signed in Block V by an FAA inspector at your Flight Standards District Office (FSDO) |
| Military | JSAMTCC certificate of eligibility, or an FSDO review of your specialty (MOS, AFSC or NEC), service records and a letter from your executive, maintenance or classification officer | The military certificate of eligibility, or Form 8610-2 signed by an FAA inspector |
Two limits the FAA spells out in its FAQ: long hours do not shorten the calendar requirement (3,120 hours worked in one year does not count as 18 months), and military time spent training for a specialty does not count, only time working in it (FAA mechanic FAQ; FAA experience page).
What are the steps, in order?
- Qualify through school, documented experience or military credit, as above.
- Get an FAA Tracking Number (FTN) by registering in IACRA.
- Book and pass the written tests with PSI: General (AMG) plus Airframe (AMA) and/or Powerplant (AMP). See Scheduling, cost and retakes for the written tests.
- Book the oral and practical (O&P) with a Designated Mechanic Examiner (DME). Bring two identically prepared Forms 8610-2, your passing test reports and photo ID. See The oral and practical (O&P) test.
- Receive a temporary certificate from the DME. It is valid for 120 days while the FAA issues the permanent certificate (FAA-G-ACS-1, chapter 7). The FAA charges nothing to issue the certificate, but the written tests and the DME have fees.
Can students test before they finish school?
Yes, in two ways. A school can give a student who finished the General portion of the curriculum a document that allows taking the General written test early (65.75(c)). A school can also show the FAA that a student in the final subjects is ready for the oral and practical tests, which may then be taken before the written tests (65.80).
How long does it take?
School: about 18 to 24 months by the FAA's estimate. Experience: at least 18 months for one rating or 30 months for both. After that, you have 24 months to pass every test; a written test report expires 24 calendar months after the month you took the test (FAA-G-ACS-1, chapter 5).
Free mini quiz: 6 practice questions
Six questions on regulations and publications, an area of the General test (ACS area AM.I.I). These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.I.I.K2 g4-006
Under 14 CFR 65.83, which work history allows a mechanic to exercise the privileges of the certificate today?
- Worked as a mechanic under the certificate for 5 of the last 24 months at a repair station
- Supervised maintenance in an executive capacity for 7 of the last 24 months
- Worked as a mechanic for 8 months in a row that ended 30 months ago
Show answer
Answer: B. 14 CFR 65.83 requires at least 6 months within the preceding 24 months of serving as a mechanic, technically supervising mechanics, or supervising maintenance in an executive capacity, in any combination. Seven months of executive supervision qualifies; 5 months is too short, and work ending 30 months ago falls outside the 24-month window.
Source: 14 CFR 65.83
AM.I.I.K2 g4-007
A certificated mechanic has worked outside aviation for the past three years. Other than building six months of qualifying experience, what lets the mechanic exercise the certificate's privileges again?
- Passing the general mechanic knowledge test again
- Completing an 8-hour inspection authorization refresher course
- The FAA finds that the mechanic is able to do that work
Show answer
Answer: C. 14 CFR 65.83(a) allows a mechanic who lacks the 6 months of experience in the last 24 to exercise privileges once the Administrator has found the mechanic able to do the work. The certificate does not expire, and no written test or refresher course is named as an alternative in the rule.
Source: 14 CFR 65.83
AM.I.I.K6 g4-015
Under 14 CFR Part 1, how is time in service defined for maintenance time records?
- From engine start before the flight until engine shutdown after landing
- From the moment it leaves the ground until it touches down at the next landing
- From the time the aircraft first moves under its own power until it stops after landing
Show answer
Answer: B. 14 CFR 1.1 defines time in service, for maintenance records, as the time from when the aircraft leaves the surface of the earth until it touches the ground at the next point of landing. Engine-start-to-shutdown or block time includes taxi and is longer than time in service.
Source: 14 CFR 1.1
AM.I.I.K8 g4-020
A student mechanic wants to find when an annual inspection is required for a privately operated airplane. Which part of 14 CFR states that requirement?
- Part 43
- Part 91
- Part 65
Show answer
Answer: B. 14 CFR 91.409 (General Operating and Flight Rules) states when annual and 100-hour inspections are required. Part 43 covers how maintenance and inspections are done and recorded, including the scope in Appendix D, and Part 65 covers mechanic certification and privileges.
Source: 14 CFR 91.409
AM.I.I.K9 g4-022
What is the regulatory status of an advisory circular such as AC 43.13-1B?
- It is guidance, not mandatory unless a regulation or AD requires its use
- It is binding on all certificated mechanics in the same way as a Part 43 regulation
- It is FAA-approved data that may be used for any major repair
Show answer
Answer: A. Advisory circulars provide guidance and acceptable methods but are not regulatory unless incorporated by a rule or AD. AC 43.13-1B is acceptable data; it can support a major repair only under the limited conditions it states, not for any major repair.
Source: FAA-H-8083-30B, Regulations, Maintenance Forms, Records, and Publications; AC 43.13-1B
AM.I.I.K11 g4-026
Before using a maintenance manual procedure for a task, what should a mechanic confirm about the manual?
- That it was printed within the last 12 months by the manufacturer
- That it is current and its effectivity covers that aircraft
- That the illustrated parts catalog contains the same procedure
Show answer
Answer: B. 14 CFR 65.81(b) requires the mechanic to understand the current instructions of the manufacturer and the maintenance manuals for the operation. Checking the revision record and effectivity ensures the procedure applies; print date means nothing, and the parts catalog does not contain procedures.
Source: 14 CFR 65.81; FAA-H-8083-30B, Regulations, Maintenance Forms, Records, and Publications
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- Do I need both ratings?
- No. The FAA issues the certificate with an Airframe rating, a Powerplant rating, or both. Each rating needs its own experience (or school curriculum) and its own written test.
- Does a foreign maintenance license count?
- No. The FAA FAQ says that even with a similar license from another country you must still meet the FAA eligibility requirements and pass the required tests.
- Can I work on aircraft without the certificate?
- Yes, under the supervision of a certificated mechanic or repairman, or under a repair station or air carrier certificate, but you cannot approve work for return to service yourself (FAA mechanic FAQ).
- Does the certificate expire?
- No. The FAA FAQ says it is valid until surrendered, suspended or revoked. To use its privileges you need recent experience: 6 months of mechanic work in the last 24 (14 CFR 65.83).
Sources
- 14 CFR 65.71, mechanic eligibility requirements: general. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.77, experience requirements. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.75, knowledge requirements (written tests, early General test). eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.79, skill requirements (oral and practical tests). eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.80, Part 147 students taking the oral and practical early. eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- 14 CFR 65.17, tests: general procedure (70 percent minimum passing grade). eCFR, Title 14 current as of 2026-11-09. Text read 2026-11-11.
- Become a Mechanic: Frequently Asked Questions. FAA. Read 2026-11-11.
- Experience Requirements to Become an Aircraft Mechanic. FAA. Read 2026-11-11.
- Become an Aviation Mechanic. FAA. Read 2026-11-11.
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic ACS (with Changes 1 and 2, September 2024). FAA. Read 2026-11-11.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.