Scheduling, test day and retakes for the A&P written tests

Get an FAA Tracking Number (FTN) in IACRA, create an account with PSI, the FAA's testing vendor, and book the AMG, AMA or AMP test at a PSI test center. On test day bring photo ID and your authorization to test: a Part 147 school document, Form 8610-2 signed by an FAA inspector, or a military certificate of eligibility. If you fail, you can retest after 30 days, or sooner with a signed statement of extra instruction from a mechanic who holds the rating you want (14 CFR 65.19).

Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-11); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.

How do I book an A&P written test?

  1. Register in IACRA to get your FTN. Get your name right there: PSI's registration system cannot change your name or fix a misspelling, so corrections are made in IACRA.
  2. Create an account on the PSI FAA portal.
  3. Choose the test (AMG, AMA or AMP), a test center and a time, then pay.

Source: FAA-G-ACS-1, chapter 4. The FAA's October 2026 testing advisory says PSI moves the FAA program to a new scheduling and check-in platform in the first quarter of 2027 and will contact applicants whose appointments are affected (ATCA, October 2026).

What does each test look like?

TestQuestionsTimePassing score
AMG General602.0 h70%
AMA Airframe1002.0 h70%
AMP Powerplant1002.0 h70%

Every question is multiple choice with one correct answer (FAA-G-ACS-1, chapter 3; testing matrix). Anyone applying for a first certificate takes the General test; a mechanic adding a second rating does not take it again. Figures come from the testing supplement (FAA-CT-8080-4G) at the center, and the FAA is moving AMT questions to images embedded on screen; the supplements stay available until the FAA announces a removal date (ATCA, October 2026).

What do I bring, and what can I use?

Sources: FAA-G-ACS-1, chapters 3 and 4; testing matrix.

How much does the A&P written test cost?

PSI sets the test fee and shows it when you pay; the FAA's FAQ tells applicants to contact PSI for current fees and does not publish an amount. Through the FAA and JSAMTCC agreement, active-duty, guard and reserve members, their dependents, military retirees, DoD civilians and DHS civilians can take the AMT written tests at no cost (FAA mechanic FAQ). The oral and practical test is a separate fee set by the examiner, and the FAA charges nothing to issue the certificate.

How long is a passing result good for?

A written test report expires 24 calendar months after the month you took the test, and you must pass all the tests for a rating within 24 months (FAA-G-ACS-1, chapter 5; 65.71(a)(3)). Reports for tests taken since January 13, 2020 can be reprinted free from the PSI portal. The report lists an ACS code for every topic you missed, and the examiner retests those codes during the oral test.

What happens if I fail?

You may retest 30 days after the failed test, with no paperwork beyond the failed report. To retest sooner, bring a signed statement from an airman who holds the certificate and rating you want, saying they gave you additional instruction in each subject you failed and consider you ready (65.19). The center scans the failed report and destroys it (testing matrix).

Is the test changing?

The FAA's October 2026 advisory says PSI is assessing the AMG, AMA and AMP tests against testing standards, with changes expected in 2027; question content stays tied to the ACS codes and references (ATCA, October 2026).

Free mini quiz: 6 practice questions

Six General (AMG) questions from six ACS areas: mathematics, physics, electricity, fluid lines, materials and corrosion control. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.

  1. AM.I.H.K1 g3-063

    A tapered wing panel has a root chord of 6 ft, a tip chord of 4 ft, and a span of 30 ft. What is its area?

    1. 180 sq ft
    2. 300 sq ft
    3. 150 sq ft
    Show answer

    Answer: C. A tapered panel is a trapezoid: area = (root + tip) / 2 x span = (6 + 4) / 2 x 30 = 150 sq ft. Using the root chord alone gives 6 x 30 = 180 sq ft, and forgetting to divide by 2 gives 300 sq ft.

    Source: FAA-H-8083-30B, Mathematics in Aviation Maintenance / Area of a trapezoid

  2. AM.I.J.K1 g4-041

    An engine is lifted 4 ft off the floor with a chain hoist and held there. Compared with when it rested on the floor, the engine now has more:

    1. Kinetic energy
    2. Mass and inertia
    3. Potential energy
    Show answer

    Answer: C. Potential energy is stored energy of position; raising the engine against gravity increases it by weight times height. The engine is not moving, so it has no kinetic energy, and lifting does not change its mass or inertia.

    Source: FAA-H-8083-30B, Physics for Aviation

  3. AM.I.A.K3 g1-005

    Which change increases the capacitance of a parallel-plate capacitor?

    1. Increasing the distance between the plates
    2. Increasing the area of the plates
    3. Increasing the voltage applied to the plates
    Show answer

    Answer: B. Capacitance is directly proportional to plate area and the dielectric constant and inversely proportional to plate spacing. Moving the plates apart lowers capacitance. Raising the applied voltage increases the charge stored (Q = CV) but does not change the capacitance itself.

    Source: FAA-H-8083-30B, Fundamentals of Electricity and Electronics / Capacitance; factors affecting capacitance

    Get Rivetry on Google Play

  4. AM.I.D.K1 g2-031

    A rigid tube is called out as a -10 size. What is its outside diameter?

    1. 5/8 in
    2. 5/16 in
    3. 1-1/4 in
    Show answer

    Answer: A. Rigid tube dash numbers give the outside diameter in sixteenths of an inch, so -10 is 10/16 = 5/8 in. 5/16 in reads the number as thirty-seconds, and 1-1/4 in reads it as eighths. Wall thickness is specified separately, in thousandths of an inch.

    Source: FAA-H-8083-30B, Fluid Lines and Fittings / Tube sizes

  5. AM.I.E.K1 g2-057

    Which aluminum alloy cannot be strengthened by heat treatment and is hardened only by cold working?

    1. 5052
    2. 2024
    3. 6061
    Show answer

    Answer: A. The 1xxx, 3xxx and 5xxx series are non-heat-treatable; they are strengthened by strain hardening, shown by -H tempers such as 5052-H32. 2024 (copper alloy) and 6061 (magnesium-silicon alloy) are heat-treatable and appear in -T tempers.

    Source: FAA-H-8083-30B, Aircraft Materials, Processes, and Hardware / Aluminum alloys

  6. AM.I.G.K1 g3-031

    A parked airplane has a light coating of dust and airport film, but washing with water is not practical. Which cleaning method fits?

    1. Dry wash, using a spray-on cleaner wiped off with cloths
    2. Polishing with an abrasive compound to cut through the film
    3. A full solvent wipe of the painted surfaces with MEK
    Show answer

    Answer: A. Dry wash removes airport film, dust, and light soil when liquids are not practical; it is not meant for heavy deposits. Polishing is for restoring luster to dull or oxidized surfaces and removes finish, and MEK attacks many paints.

    Source: FAA-H-8083-30B, Cleaning and Corrosion / Exterior cleaning; dry wash

Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.

Get Rivetry on Google Play

More questions

Where can I take the test?
At a PSI test center. Find one and book in the PSI FAA portal. Some overseas military bases can give FAA knowledge tests; the FAA FAQ says there are no examiners outside the US for the oral and practical.
Can I test at night or on a weekend?
Ask the test center. The FAA FAQ says hours of operation are set by each center.
Is there a practice test from PSI?
Yes. The FAA companion guide says registered users can take sample tests on the PSI portal, and the center offers a tutorial before the real test starts.
Can I ask for an accommodation?
Yes, through PSI registration, with medical documentation and the method of test administration you need (FAA-G-ACS-1, chapter 1).
What if my test report expires while I am deployed?
If you served outside the US in support of a U.S. Armed Forces operation and the report expired during that service or within 6 calendar months after you returned, 14 CFR 61.40 (applied to mechanics by 65.75(d)) lets you use the expired report for the practical test if you complete it within 6 calendar months after returning. You apply through a Flight Standards office with your orders or a similar document.

Sources

Related guides

General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.