A&P General (AMG) practice test

The FAA General test (AMG) has 60 multiple-choice questions, a 2-hour limit and a 70% passing score, drawn from 12 subject areas of the Airman Certification Standards, from fundamentals of electricity and electronics to human factors (FAA-G-ACS-1). Below are 12 free practice questions, one from each area, with the answer and explanation behind each one.

Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-11); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.

What is on the AMG test?

The companion guide gives a range for each area's share of the questions. Rivetry's own item count per area is in the last column.

ACS areaSubjectFAA share of testRivetry items
AM.I.AFundamentals of Electricity and Electronics5-15%60
AM.I.BAircraft Drawings5-10%40
AM.I.CWeight and Balance5-10%44
AM.I.DFluid Lines and Fittings5-10%38
AM.I.EAircraft Materials, Hardware, and Processes5-10%40
AM.I.FGround Operations and Servicing5-15%42
AM.I.GCleaning and Corrosion Control5-10%42
AM.I.HMathematics5-10%40
AM.I.IRegulations, Maintenance Forms, Records, and Publications5-10%40
AM.I.JPhysics for Aviation5-10%40
AM.I.KInspection Concepts and Techniques5-10%42
AM.I.LHuman Factors5-10%40

Sources: FAA-G-ACS-1, chapter 3 (test blueprint); FAA-S-ACS-1 (area codes). Rivetry has 508 General items in total.

Anyone applying for a first mechanic certificate takes the General test, whichever rating they seek; a mechanic adding a second rating does not take it again (testing matrix). Part 147 students can take it early once the school documents that they finished the General curriculum (14 CFR 65.75(c)).

How should I study for the AMG?

Worked calculations for this test

Practice by ACS area

Every AMG area has its own page with the FAA knowledge and skill elements and free questions; weight and balance (AM.I.C) is covered by the weight and balance guide.

Free mini quiz: 12 practice questions

One question from each of the 12 AMG areas, in ACS order. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.

  1. AM.I.A.K3 g1-006

    A 10 microfarad capacitor and a 15 microfarad capacitor are connected in series. What is the total capacitance?

    1. 25 microfarads
    2. 12.5 microfarads
    3. 6 microfarads
    Show answer

    Answer: C. Capacitors in series combine like resistors in parallel: CT = (10 x 15) / (10 + 15) = 150 / 25 = 6 microfarads. Adding them to get 25 microfarads is the rule for capacitors in parallel. Averaging them (12.5) follows no circuit law.

    Source: FAA-H-8083-30B, Fundamentals of Electricity and Electronics / Capacitors in series and parallel

  2. AM.I.B.K1 g1-061

    On an aircraft drawing, medium-weight dashed lines represent:

    1. Edges or surfaces hidden in that view
    2. The center of a hole, arc or symmetrical part
    3. Alternate positions of a moving part, such as a lever
    Show answer

    Answer: A. Hidden lines are medium-weight short dashes showing edges that cannot be seen from the viewing direction. Center lines are thin lines of alternating long and short dashes. Alternate positions are shown with phantom lines, made of long dashes separated by pairs of short dashes.

    Source: FAA-H-8083-30B, Aircraft Drawings / Lines and their meanings

  3. AM.I.C.K1 g2-002

    Compared with the older empty weight used for many airplanes certificated under CAR 3, what does the GAMA-style basic empty weight include that the older figure did not?

    1. Unusable fuel
    2. Full hydraulic fluid
    3. Full engine oil
    Show answer

    Answer: C. Basic empty weight counts full engine oil, while the older empty weight counted only undrainable oil. Unusable fuel and full hydraulic fluid are tempting picks, but both definitions already include them, so neither is the difference.

    Source: FAA-H-8083-30B, Aircraft Weight and Balance / Empty weight terminology

    Get Rivetry on Google Play

  4. AM.I.D.K1 g2-032

    A 3,000 psi hydraulic pressure line runs through a wheel well where it is exposed to debris. Which tubing material is the normal choice?

    1. 1100-H14 aluminum alloy tubing
    2. 5052-O aluminum alloy tubing
    3. Corrosion-resistant steel tubing
    Show answer

    Answer: C. Corrosion-resistant steel tubing is used for high-pressure hydraulic lines and where lines are exposed to abrasion or heat, as in wheel wells. 5052-O aluminum is a common general-purpose tubing for fuel, oil and lower-pressure systems. 1100-H14 is suited only to low-pressure lines such as instrument and vent lines.

    Source: FAA-H-8083-30B, Fluid Lines and Fittings / Tubing materials

  5. AM.I.E.K1 g2-058

    What is Alclad 2024 aluminum sheet?

    1. 2024 alloy given a chromate conversion coating at the mill
    2. 2024 alloy with a thin layer of pure aluminum bonded to each surface
    3. Pure aluminum sheet with a thin 2024 skin rolled onto each side
    Show answer

    Answer: B. Alclad is a strong heat-treatable core, here 2024, with a thin layer of commercially pure aluminum bonded to both surfaces. The pure aluminum resists corrosion and protects the core. A chromate conversion coating is a separate surface treatment. Alclad's strength comes from the alloy core, not the cladding.

    Source: FAA-H-8083-30B, Aircraft Materials, Processes, and Hardware / Alclad

  6. AM.I.F.K1 g3-001

    A crew is towing a light twin out of a crowded hangar with a tug, with a wing walker at each wingtip and a qualified person on the brakes. How fast should the aircraft be moved?

    1. No faster than the wing walkers can comfortably walk alongside
    2. At whatever speed the tug driver judges safe, since the brakes are manned
    3. At a steady 10 mph so the nose wheel tracks straight without shimmy
    Show answer

    Answer: A. Towing speed is limited to the walking pace of the team so the wing walkers can keep watch on clearances and signal a stop in time. Having someone on the brakes does not make a faster tow safe; a hard stop on the aircraft brakes can overload the tow bar and nose gear.

    Source: FAA-H-8083-30B, Safety, Ground Operations, and Servicing / Aircraft towing

  7. AM.I.G.K1 g3-032

    How should an acrylic windshield be cleaned?

    1. Wipe it dry first with a clean cloth to clear the dust, then apply the cleaner
    2. Flood it with water and mild soap, using a bare hand or soft cloth
    3. Wipe bug residue off with acetone or lacquer thinner, then polish it dry
    Show answer

    Answer: B. Flooding with water and mild soap floats grit away without scratching. Dry wiping drags abrasive dust across the plastic and builds static that attracts more. Acetone and similar solvents soften and craze acrylic.

    Source: FAA-H-8083-30B, Cleaning and Corrosion / Cleaning transparent plastics

  8. AM.I.H.K1 g3-064

    A piston has a diameter of 5.0 in. What is the area of its face?

    1. 19.63 sq in
    2. 78.54 sq in
    3. 15.71 sq in
    Show answer

    Answer: A. Area = pi x r^2, with r = 5.0 / 2 = 2.5 in, so 3.1416 x 6.25 = 19.63 sq in. Using the diameter as the radius gives 78.54 sq in, and pi x d = 15.71 is the circumference in inches, not an area.

    Source: FAA-H-8083-30B, Mathematics in Aviation Maintenance / Area of a circle

  9. AM.I.I.K6 g4-016

    A private pilot who owns an airplane operated only under part 91 wants to do some of its upkeep. Which task is preventive maintenance the owner may perform?

    1. Replacing a magneto and timing it to the engine
    2. Overhauling a brake master cylinder
    3. Replacing a position light bulb
    Show answer

    Answer: C. 14 CFR 43.3(g) lets an owner-pilot perform preventive maintenance, which Part 43 Appendix A(c) lists; replacing bulbs, reflectors, and lenses of position and landing lights is on that list. Magneto replacement with timing and component overhaul involve complex assembly and are maintenance, not preventive maintenance.

    Source: 14 CFR 43.3; 14 CFR Part 43 Appendix A

  10. AM.I.J.K1 g4-042

    A tug pushing an airplane doubles its speed from 3 mph to 6 mph. By what factor does the airplane's kinetic energy increase?

    1. 2 times
    2. 4 times
    3. 8 times
    Show answer

    Answer: B. Kinetic energy is 1/2 m v squared, so doubling speed gives 2 x 2 = 4 times the energy. Assuming energy rises in direct proportion to speed (2 times) ignores the square.

    Source: FAA-H-8083-30B, Physics for Aviation

  11. AM.I.K.K1 g4-067

    A vernier caliper's main beam is graduated in 0.025-in divisions with a 25-division vernier. The vernier zero is just past the 1.425-in mark, and the 12th vernier line aligns with a beam line. What is the reading?

    1. 1.437 in
    2. 1.462 in
    3. 1.545 in
    Show answer

    Answer: A. Each vernier division adds 0.001 in: 1.425 + 0.012 = 1.437 in. Adding 0.012 to the next beam mark (1.450) gives 1.462, and reading the vernier as hundredths (1.425 + 0.12) gives 1.545.

    Source: FAA-H-8083-30B, Hand Tools and Measuring Devices

  12. AM.I.L.K1 g4-093

    Under a just culture, how is a mechanic who reports an honest error treated compared with one who knowingly skipped required steps?

    1. Both are disciplined equally so that future errors and shortcuts are deterred
    2. Neither faces any consequence, because all reports are protected from disciplinary action
    3. The honest error is used to learn; reckless or deliberate acts can be disciplined
    Show answer

    Answer: C. A just culture encourages reporting by not punishing honest errors, while still holding people accountable for reckless behavior or deliberate violations. Punishing every error drives reporting underground, and blanket immunity removes accountability for willful acts.

    Source: FAA-H-8083-30B, Human Factors

Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.

Get Rivetry on Google Play

More questions

Are these the real FAA AMG questions?
No. The FAA does not publish its live test questions. These are original practice items written from the FAA handbooks and regulations and tagged with the ACS code they practice.
What score do I need?
70 percent on each test (14 CFR 65.17).
Does a practice score predict my result?
No. Use practice to find weak ACS areas. Rivetry does not publish pass rates or predictions.

Sources

Related guides

General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.