A&P physics for aviation practice questions
Physics for Aviation is ACS area AM.I.J of the FAA General (AMG) test, 5-10% of its 60 questions, so roughly 3 to 6 questions (FAA-G-ACS-1, chapter 3). The ACS lists 13 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.I.J.K1. Below are 5 sample original questions from Rivetry's reviewed bank, with the explanation for each.
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-14); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
What does the ACS list for physics for aviation?
Physics for aviation covers matter and energy, work and power, simple machines, heat and pressure, the gas laws, Bernoulli and Newton, the standard atmosphere and the basics of flight and flight controls. Expect arithmetic: force, area and pressure, horsepower and temperature conversions.
| Code | Knowledge element |
|---|---|
| AM.I.J.K1 | Matter and energy. |
| AM.I.J.K2 | Work, power, force, and motion. |
| AM.I.J.K3 | Simple machines and mechanics. |
| AM.I.J.K4 | Heat and pressure. |
| AM.I.J.K5 | Bernoulli’s Principle. |
| AM.I.J.K6 | Newton’s Law of Motion. |
| AM.I.J.K7 | Gas law and fluid mechanics. |
| AM.I.J.K8 | Theory of flight (aerodynamics). |
| AM.I.J.K9 | Standard atmosphere and factors affecting atmospheric conditions. |
| AM.I.J.K10 | Primary and secondary aircraft flight controls. |
| AM.I.J.K11 | Additional aerodynamic devices, including vortex generators, wing fences, and stall strips. |
| AM.I.J.K12 | Relationship between temperature, density, weight, and volume. |
| AM.I.J.K13 | Force, area, or pressure in a specific application. |
Source: FAA-S-ACS-1, area AM.I.J, read 2026-11-14. The written test draws on the knowledge elements. The ACS also lists 4 risk management and 8 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).
How many physics for aviation questions will I get?
The FAA gives this area 5-10% of the AMG test. On 60 questions that is about 3 to 6 (our arithmetic on the FAA range). Rivetry has 40 reviewed items tagged AM.I.J, 4 of them free.
How should I study physics for aviation?
- Force = pressure × area. Be able to solve it for any of the three (K13, S4).
- Work = force × distance and power = work ÷ time. One horsepower is 33,000 foot-pounds per minute, or 550 per second (K2, S8).
- For the gas laws use absolute temperature (Rankine or Kelvin) and absolute pressure (K7).
- Standard sea-level conditions are 59 °F (15 °C) and 29.92 inches of mercury. A higher density altitude means less engine power and less lift (K9, R1).
- The mechanical advantage of a lever is the effort arm divided by the resistance arm (K3, S5).
Learn it from FAA-H-8083-30B, then test yourself.
What could the practical ask me to do?
These are the 8 skill elements the ACS lists for AM.I.J. Any of them can become a project at the oral and practical, done with the references the examiner provides (Practical test projects by ACS area).
- S1 Convert temperature units (e.g., from Celsius to Fahrenheit).
- S2 Determine density altitude.
- S3 Determine pressure altitude.
- S4 Calculate force, area, or pressure in a specific application.
- S5 Demonstrate the mechanical advantage of various types of levers.
- S6 Design an inclined plane on paper, indicating the mechanical advantage.
- S7 Identify changes in pressure and velocity as a fluid passes through a venturi.
- S8 Calculate horsepower.
The risk management elements for this area: Changes in aircraft and engine performance due to density altitude (R1); Effect a repair can have on a flight surface (R2); Use of performance/testing data (R3); Use of related units of measure (e.g., Celsius vs. Fahrenheit) (R4).
Free mini quiz: 5 practice questions
5 AM.I.J questions: 4 from the app's free set and 1 more as a sample. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.I.J.K2 g4-043
A mechanic uses a hoist to lift a 500-lb engine 6 ft. How much work is done on the engine?
- 83 ft-lb
- 36,000 ft-lb
- 3,000 ft-lb
Show answer
Answer: C. Work = force x distance = 500 lb x 6 ft = 3,000 ft-lb. Dividing (500 / 6 = 83) is the wrong operation, and 36,000 comes from using 72 in but still labeling the result ft-lb (it would be 36,000 in-lb).
Source: FAA-H-8083-30B, Physics for Aviation
AM.I.J.K2 g4-044
An electric hoist lifts a 1,100-lb engine 15 ft in 30 seconds. How much horsepower is delivered to the load?
- 30 hp
- 0.017 hp
- 1.0 hp
Show answer
Answer: C. Work = 1,100 lb x 15 ft = 16,500 ft-lb. Power = 16,500 / 30 s = 550 ft-lb/s, and 1 hp = 550 ft-lb/s, so 1.0 hp. Forgetting the time gives 16,500 / 550 = 30, and dividing 550 ft-lb/s by 33,000 (a per-minute constant) gives 0.017.
Source: FAA-H-8083-30B, Physics for Aviation
AM.I.J.K1 g4-041
An engine is lifted 4 ft off the floor with a chain hoist and held there. Compared with when it rested on the floor, the engine now has more:
- Kinetic energy
- Mass and inertia
- Potential energy
Show answer
Answer: C. Potential energy is stored energy of position; raising the engine against gravity increases it by weight times height. The engine is not moving, so it has no kinetic energy, and lifting does not change its mass or inertia.
Source: FAA-H-8083-30B, Physics for Aviation
AM.I.J.K1 g4-042
A tug pushing an airplane doubles its speed from 3 mph to 6 mph. By what factor does the airplane's kinetic energy increase?
- 2 times
- 4 times
- 8 times
Show answer
Answer: B. Kinetic energy is 1/2 m v squared, so doubling speed gives 2 x 2 = 4 times the energy. Assuming energy rises in direct proportion to speed (2 times) ignores the square.
Source: FAA-H-8083-30B, Physics for Aviation
AM.I.J.K3 g4-045
A mechanic uses a 60-in bar as a first-class lever to raise a 240-lb load, with the fulcrum 12 in from the load. Ignoring the bar's weight, what force is needed at the far end of the bar?
- 48 lb
- 60 lb
- 960 lb
Show answer
Answer: B. The effort arm is 60 - 12 = 48 in. Effort x 48 = 240 x 12, so effort = 2,880 / 48 = 60 lb. Using the full 60-in bar as the effort arm gives 48 lb, and inverting the ratio gives 960 lb.
Source: FAA-H-8083-30B, Physics for Aviation
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- What does Bernoulli's principle say?
- In a moving fluid, where velocity increases static pressure decreases, as in a venturi (K5, S7).
- How do I convert Celsius to Fahrenheit?
- °F = °C × 9/5 + 32, and °C = (°F − 32) × 5/9 (S1).
- Are these the real FAA questions?
- No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
- How many physics for aviation questions does Rivetry have?
- 40 reviewed items, 4 of them free.
Sources
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards (November 1, 2021). FAA. Read 2026-11-14.
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic ACS (with Changes 1 and 2, September 2024). FAA. Read 2026-11-14.
- FAA-H-8083-30B, Aviation Maintenance Technician Handbook: General. FAA. Used to write the practice items 2026-11-14.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.