A&P human factors practice questions

Human Factors is ACS area AM.I.L of the FAA General (AMG) test, 5-10% of its 60 questions, so roughly 3 to 6 questions (FAA-G-ACS-1, chapter 3). The ACS lists 11 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.I.L.K1. Below are 5 sample original questions from Rivetry's reviewed bank, with the explanation for each.

Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-14); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.

What does the ACS list for human factors?

Human factors is about why maintenance errors happen and how to catch them: safety culture, error types, fatigue, communication, shift turnover and reporting. The questions ask you to recognize the condition that leads to an error more than to recite facts.

CodeKnowledge element
AM.I.L.K1Safety culture and organizational factors.
AM.I.L.K2Human error principles.
AM.I.L.K3Event investigation.
AM.I.L.K4Human performance and limitations.
AM.I.L.K5Physical and social environment.
AM.I.L.K6Communication/reporting of hazards.
AM.I.L.K7Teamwork and leadership.
AM.I.L.K8Professionalism and integrity.
AM.I.L.K9Shift and task turnover.
AM.I.L.K10Conditions/preconditions for unsafe acts.
AM.I.L.K11Types of human errors.

Source: FAA-S-ACS-1, area AM.I.L, read 2026-11-14. The written test draws on the knowledge elements. The ACS also lists 3 risk management and 3 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).

How many human factors questions will I get?

The FAA gives this area 5-10% of the AMG test. On 60 questions that is about 3 to 6 (our arithmetic on the FAA range). Rivetry has 40 reviewed items tagged AM.I.L, 4 of them free.

How should I study human factors?

Learn it from FAA-H-8083-30B, then test yourself.

What could the practical ask me to do?

These are the 3 skill elements the ACS lists for AM.I.L. Any of them can become a project at the oral and practical, done with the references the examiner provides (Practical test projects by ACS area).

The risk management elements for this area: Selective reporting of hazards (R1); Fatigue management and fitness for duty (R2); Non-invasive, condition-monitoring technologies (R3).

Free mini quiz: 5 practice questions

5 AM.I.L questions: 4 from the app's free set and 1 more as a sample. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.

  1. AM.I.L.K1 g4-094

    Which list gives the four components of a safety management system (SMS)?

    1. Hazard reporting, safety training, internal auditing, and corrective discipline
    2. Inspection, accident investigation, corrective action, and regulatory enforcement
    3. Safety policy, safety risk management, safety assurance, and safety promotion
    Show answer

    Answer: C. 14 CFR Part 5 organizes SMS into safety policy, safety risk management, safety assurance and safety promotion. Reporting, training and audits are activities within those components, not the components themselves.

    Source: 14 CFR Part 5; FAA-H-8083-30B, Human Factors

  2. AM.I.L.K2 g4-095

    In James Reason's 'Swiss cheese' model of accidents, what is a latent condition?

    1. The final unsafe act by a front-line worker that directly triggers the accident sequence
    2. A random part failure that has nothing to do with people, procedures or the organization
    3. A hidden weakness, such as poor procedures or staffing, dormant until failures line up
    Show answer

    Answer: C. Latent conditions are weaknesses built into the system by decisions on procedures, staffing, training or equipment; they can sit unnoticed for a long time. The final unsafe act at the sharp end is an active failure, the other half of the model.

    Source: FAA-H-8083-30B, Human Factors

  3. AM.I.L.K2 g4-096

    Which approach reflects the human factors view of maintenance error?

    1. Errors will occur, so systems should be designed to catch and contain them
    2. Errors can be eliminated by disciplining those who make them
    3. Errors happen mainly to new mechanics, so training alone will stop them
    Show answer

    Answer: A. Human factors accepts that even skilled, careful people make errors, so defenses such as clear procedures, independent inspections and functional checks are used to catch and contain them. Punishment alone does not remove the conditions that cause errors, and experienced mechanics make errors too.

    Source: FAA-H-8083-30B, Human Factors

    Get Rivetry on Google Play

  4. AM.I.L.K1 g4-093

    Under a just culture, how is a mechanic who reports an honest error treated compared with one who knowingly skipped required steps?

    1. Both are disciplined equally so that future errors and shortcuts are deterred
    2. Neither faces any consequence, because all reports are protected from disciplinary action
    3. The honest error is used to learn; reckless or deliberate acts can be disciplined
    Show answer

    Answer: C. A just culture encourages reporting by not punishing honest errors, while still holding people accountable for reckless behavior or deliberate violations. Punishing every error drives reporting underground, and blanket immunity removes accountability for willful acts.

    Source: FAA-H-8083-30B, Human Factors

  5. AM.I.L.K3 g4-097

    What is the main purpose of a structured maintenance error investigation such as the Maintenance Error Decision Aid (MEDA)?

    1. To decide which individual should be disciplined for the error
    2. To find the contributing factors so they can be corrected
    3. To estimate the event's cost for insurance and warranty claims
    Show answer

    Answer: B. MEDA-type investigations assume that most errors result from contributing factors such as poor information, tools, time pressure or the environment. The goal is to find and fix those factors to prevent recurrence, not to assign blame or calculate cost.

    Source: FAA-H-8083-30B, Human Factors

Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.

Get Rivetry on Google Play

More questions

How much of the General test is human factors?
It is one of the 12 General areas in FAA-S-ACS-1, with 5 to 10 percent of the questions.
Where can I read about it?
The human factors chapter of the FAA General handbook (FAA-H-8083-30B) covers the Dirty Dozen, error models and fatigue.
Are these the real FAA questions?
No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
How many human factors questions does Rivetry have?
40 reviewed items, 4 of them free.

Sources

Related guides

General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.