A&P regulations, forms, records and publications practice questions
Regulations, Forms, Records and Publications is ACS area AM.I.I of the FAA General (AMG) test, 5-10% of its 60 questions, so roughly 3 to 6 questions (FAA-G-ACS-1, chapter 3). The ACS lists 23 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.I.I.K1. Below are 5 sample original questions from Rivetry's reviewed bank, with the explanation for each.
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-14); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
What does the ACS list for regulations, forms, records and publications?
Regulations, maintenance forms, records and publications is the paperwork area: what a mechanic may approve, how to write a logbook entry, which FAA form does what, and the difference between approved and acceptable data. It comes back at the oral and in many practical projects.
| Code | Knowledge element |
|---|---|
| AM.I.I.K1 | Privileges and limitations of a mechanic certificate. |
| AM.I.I.K2 | Recent experience requirements and how to re-establish once lost. |
| AM.I.I.K3 | Maintenance record entry for approval for return to service after maintenance and alterations. |
| AM.I.I.K4 | Maintenance record entry for approval for return to service after inspection. |
| AM.I.I.K5 | The purpose and use of FAA forms (e.g., FAA Forms 337, 8010-4, 8100-2, 8130-3). |
| AM.I.I.K6 | Maintenance terminology as defined in 14 CFR part 1 (e.g., time in service, maintenance, preventive maintenance, major alteration, major repair, minor alteration, minor repair). |
| AM.I.I.K7 | Criteria and responsibility for determining whether a repair or alteration is major or minor. |
| AM.I.I.K8 | The regulatory framework, including general subject matter of the parts of 14 CFR relevant to aircraft maintenance and mechanics. |
| AM.I.I.K9 | Agency publications and guidance materials, including aircraft specifications, TCDSs, advisory circulars (AC), and airworthiness directives (AD). |
| AM.I.I.K10 | Alternative Method of Compliance (AMOC) for an AD. |
| AM.I.I.K11 | Manufacturer publications, including maintenance manuals, service bulletins, maintenance alerts, and master minimum equipment lists. |
| AM.I.I.K12 | FAA databases and resources available, including TCDSs and supplemental type certificates. |
| AM.I.I.K13 | Compliance requirements for manufacturer-specified methods, techniques, and practices. |
| AM.I.I.K14 | Compliance requirements for manufacturer-specified maintenance and inspection intervals. |
| AM.I.I.K15 | FAA-approved maintenance data, including maintenance manuals and other methods, techniques, and practices acceptable by the administrator. |
| AM.I.I.K16 | Difference between approved data and acceptable data, and when each is required. |
| AM.I.I.K17 | FAA-approved airworthiness limitations. |
| AM.I.I.K18 | Alert, caution, and warning indications; and the basic definition of warnings, cautions, and notes that are used in maintenance and operating manuals. |
| AM.I.I.K19 | Inoperative equipment. |
| AM.I.I.K20 | Discrepancy records or placards. |
| AM.I.I.K21 | Usable on (effectivity) codes in parts manuals. |
| AM.I.I.K22 | Methods used to establish the serial number effectivity of an item. |
| AM.I.I.K23 | Mechanic address change notification procedures. |
Source: FAA-S-ACS-1, area AM.I.I, read 2026-11-14. The written test draws on the knowledge elements. The ACS also lists 5 risk management and 18 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).
How many regulations, forms, records and publications questions will I get?
The FAA gives this area 5-10% of the AMG test. On 60 questions that is about 3 to 6 (our arithmetic on the FAA range). Rivetry has 40 reviewed items tagged AM.I.I, 4 of them free.
How should I study regulations, forms, records and publications?
- Know the forms by number: 337 for a major repair or alteration, 8010-4 for a malfunction or defect report, 8100-2 for the standard airworthiness certificate and 8130-3 for an authorized release certificate (K5).
- Learn the 14 CFR part 1 definitions closely: maintenance, preventive maintenance, major and minor repair, major and minor alteration, time in service (K6).
- Know what goes in a maintenance entry under 14 CFR 43.9 and an inspection entry under 43.11 (K3, K4).
- Separate approved data, such as ADs, type certificate data sheets and STCs, from acceptable data, such as AC 43.13-1B, and know that a major repair or alteration needs approved data (K16).
Learn it from FAA-H-8083-30B, then test yourself.
What could the practical ask me to do?
These are the 18 skill elements the ACS lists for AM.I.I. Any of them can become a project at the oral and practical, done with the references the examiner provides (Practical test projects by ACS area).
- S1 Complete an FAA Form 337 for a major repair or alteration.
- S2 Examine an FAA Form 337 for accuracy.
- S3 Determine an aircraft's inspection status by reviewing the aircraft's maintenance records.
- S4 Complete an aircraft maintenance record entry for the compliance of a reoccurring AD for a specific airframe, aircraft engine, appliance, or propeller.
- S5 Compare an equipment list for an aircraft to equipment installed.
- S6 Locate applicable FAA aircraft specifications and FAA TCDS for an aircraft or component.
- S7 Complete an aircraft maintenance record entry for return to service.
- S8 Determine applicability of an AD.
- S9 Check a Technical Standard Order (TSO) or part manufacturing authorization for the proper markings.
- S10 Use a manufacturer’s illustrated parts catalog to locate a specific part number and applicability.
- S11 Locate supplemental type certificates applicable to a specific aircraft.
- S12 Determine the conformity of aircraft instrument range markings and placarding.
- S13 Determine approved replacement parts for installation on a given aircraft.
- S14 Determine maximum allowable weight of a specific aircraft.
- S15 Determine whether a given repair or alteration is major or minor.
- S16 Determine applicability of approved data for a major repair.
- S17 Explain the difference between “approved data” (required for major repair/alteration) and “acceptable data” (required for minor repair/alteration).
- S18 Complete a 100-hour inspection aircraft maintenance record entry.
The risk management elements for this area: Completeness or accuracy of documentation (R1); Use of SDS (R2); Complacency during documentation phase of maintenance procedures (R3); Adherence to warnings, cautions, or notes in maintenance and operational manuals (R4); Determination of component applicability to a given aircraft (R5).
Free mini quiz: 5 practice questions
5 AM.I.I questions: 4 from the app's free set and 1 more as a sample. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.I.I.K1 g4-001
A mechanic holding airframe and powerplant ratings, but no inspection authorization, completes a minor repair to a cabin door hinge using the manufacturer's maintenance manual. Who may approve this work for return to service?
- Only a mechanic who also holds an inspection authorization
- The mechanic who did it, by making the required record entry
- Only an FAA inspector, after examining the finished repair in person
Show answer
Answer: B. Under 14 CFR 65.85, an airframe-rated mechanic may approve and return to service work they performed, supervised or inspected, except major repairs and major alterations. A minor repair is within that privilege; an inspection authorization is needed only to approve major repairs and alterations.
Source: 14 CFR 65.85; 14 CFR 43.7
AM.I.I.K1 g4-002
An A&P mechanic without an inspection authorization completes a major repair to a wing spar using FAA-approved data. What is the mechanic's role regarding return to service?
- The mechanic may do the work, but an IA or other authorized person must approve it
- The mechanic may approve the return to service, because the repair data was FAA-approved
- The mechanic may approve it once a second A&P mechanic inspects and countersigns the entry
Show answer
Answer: A. 14 CFR 65.85 excludes major repairs and major alterations from the mechanic's return-to-service privilege. Under 65.95 an inspection authorization holder (or another authorized person such as a suitably rated repair station) approves it. Approved data is required for the work but does not change who may approve it.
Source: 14 CFR 65.85; 14 CFR 65.95
AM.I.I.K1 g4-003
A powerplant-rated mechanic is asked to straighten a bent aluminum propeller blade, which 14 CFR Part 43 Appendix A lists as a major propeller repair. What does 14 CFR 65.81 allow?
- The mechanic may perform it if an IA inspects it and approves the return to service
- The mechanic may not perform it, because 65.81 excludes major propeller repairs
- The mechanic may perform it, because the powerplant rating includes propellers
Show answer
Answer: B. 14 CFR 65.81(a) excludes major repairs to, and major alterations of, propellers from a mechanic's privileges, so the work goes to an appropriately rated propeller repair station. The powerplant rating covers propellers only for work that is not a major repair or alteration, and an IA cannot extend what the mechanic may do.
Source: 14 CFR 65.81; 14 CFR Part 43 Appendix A
AM.I.I.K1 g4-004
An experienced A&P mechanic has never adjusted a particular type of cable tension regulator. Under 14 CFR 65.81, how can the mechanic become able to approve that job for return to service?
- By doing it under the direct supervision of a rated person experienced in that operation
- By reading the maintenance manual procedure carefully before doing it alone the first time
- By having an inspection authorization holder countersign the first maintenance record entry
Show answer
Answer: A. 14 CFR 65.81(a) bars a mechanic from approving work not satisfactorily performed before, unless ability is shown by doing it to the FAA's satisfaction or under direct supervision of a certificated, appropriately rated mechanic or repairman with previous experience in that operation. Reading the manual is required by 65.81(b) but is not enough on its own.
Source: 14 CFR 65.81
AM.I.I.K9 g4-021
A mechanic needs to confirm which engine models and propellers are approved for a type-certificated light airplane. Which FAA document is the primary reference?
- The type certificate data sheet for that airplane
- The pilot's operating handbook for that airplane
- AC 43.13-1B, Acceptable Methods, Techniques, and Practices
Show answer
Answer: A. The type certificate data sheet lists the approved engines, propellers, fuel grades, weights, CG range and other type design limits. The POH is an operating document and AC 43.13-1B gives general repair practices; neither defines the approved type design.
Source: FAA-H-8083-30B, Regulations, Maintenance Forms, Records, and Publications
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- What is an AMOC?
- An alternative method of compliance with an airworthiness directive, approved by the FAA. The ACS lists it as K10.
- Do I have to report a change of address?
- Yes. 14 CFR 65.21 requires written notice to the FAA within 30 days of moving your permanent mailing address (K23).
- Are these the real FAA questions?
- No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
- How many regulations, forms, records and publications questions does Rivetry have?
- 40 reviewed items, 4 of them free.
Sources
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards (November 1, 2021). FAA. Read 2026-11-14.
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic ACS (with Changes 1 and 2, September 2024). FAA. Read 2026-11-14.
- FAA-H-8083-30B, Aviation Maintenance Technician Handbook: General. FAA. Used to write the practice items 2026-11-14.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.