A&P airframe inspection practice questions
Airframe Inspection is ACS area AM.II.D of the FAA Airframe (AMA) test, 5-15% of its 100 questions, so roughly 5 to 15 questions (FAA-G-ACS-1, chapter 3). The ACS lists 9 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.II.D.K1. Below are 5 sample original questions from Rivetry's reviewed bank, with the explanation for each.
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-14); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
What does the ACS list for airframe inspection?
Airframe inspection covers the rules behind inspections: part 91 inspection requirements, part 43 records, ADs, life-limited parts, special inspections and approved data. The hands-on side is the 100-hour inspection and its record entry.
| Code | Knowledge element |
|---|---|
| AM.II.D.K1 | Inspection requirements under 14 CFR part 91. |
| AM.II.D.K2 | Maintenance recordkeeping requirements under 14 CFR part 43. |
| AM.II.D.K3 | Requirements for complying with ADs. |
| AM.II.D.K4 | Identification of life-limited parts and their replacement interval. |
| AM.II.D.K5 | Special inspections. |
| AM.II.D.K6 | Use of FAA-approved data. |
| AM.II.D.K7 | Compliance with service letters, service bulletins, instructions for continued airworthiness, or ADs. |
| AM.II.D.K8 | CFRs applicable to inspection and airworthiness. |
| AM.II.D.K9 | Corrosion types and identification. |
Source: FAA-S-ACS-1, area AM.II.D, read 2026-11-14. The written test draws on the knowledge elements. The ACS also lists 5 risk management and 7 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).
How many airframe inspection questions will I get?
The FAA gives this area 5-15% of the AMA test. On 100 questions that is about 5 to 15 (our arithmetic on the FAA range). Rivetry has 45 reviewed items tagged AM.II.D, 5 of them free.
How should I study airframe inspection?
- Know which inspections 14 CFR 91.409 requires: the annual, the 100-hour for aircraft carrying people for hire or used for flight instruction for hire, and progressive or other approved programs (K1).
- The 100-hour limit may be exceeded by up to 10 hours to reach a place where the inspection can be done, and the extra time counts toward the next 100 hours (91.409(b)).
- Special inspections, such as after a hard landing or a lightning strike, come from the manufacturer's instructions (K5).
- AD compliance must be recorded, and for a recurring AD the record shows when the next action is due (K3, S4).
Learn it from FAA-H-8083-31B, then test yourself.
What could the practical ask me to do?
These are the 7 skill elements the ACS lists for AM.II.D. Any of them can become a project at the oral and practical, done with the references the examiner provides (Practical test projects by ACS area).
- S1 Perform an airframe inspection, including a records check.
- S2 Perform a portion of a 100-hour inspection in accordance with 14 CFR part 43.
- S3 Enter results of a 100-hour inspection in a maintenance record.
- S4 Determine compliance with a specific AD.
- S5 Provide a checklist for conducting a 100-hour inspection.
- S6 Determine if any additional inspections are required during a particular 100-hour inspection; (i.e., 300-hour filter replacement).
- S7 Inspect seat and seatbelt, including TSO markings.
The risk management elements for this area: Interpretation of inspection instructions, which can lead to over or under maintenance being performed (R1); Visual inspection and where to apply it (R2); Performing radiographic inspections (R3); Selection and use of checklists and other maintenance publications (R4); Maintenance record documentation (R5).
Free mini quiz: 5 practice questions
5 AM.II.D questions: 5 from the app's free set and 0 more as a sample. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.II.D.K1 a2-035
An annual inspection on a privately operated airplane was completed and signed off on March 10, 2026. Without another annual inspection, through what date may the airplane be operated?
- March 10, 2027
- February 28, 2027
- March 31, 2027
Show answer
Answer: C. 14 CFR 91.409(a) requires an annual inspection within the preceding 12 calendar months, and a calendar month ends on its last day. An inspection done any day in March 2026 stays current through March 31, 2027. Counting to the same date (March 10) ignores the calendar-month rule.
Source: 14 CFR 91.409(a)
AM.II.D.K1 a2-036
A rental airplane's 100-hour inspection is due at 1,450.0 hours. With approval to fly to a shop that can do the work, it arrives and is inspected at 1,456.0 hours. When is the next 100-hour inspection due?
- 1,550.0 hours
- 1,556.0 hours
- 1,560.0 hours
Show answer
Answer: A. The 100-hour limit may be exceeded by up to 10 hours only to reach a place where the inspection can be done, and the excess time counts toward the next interval. Next due = 1,450 + 100 = 1,550 hours. Adding 100 to the actual inspection time (1,556) wrongly gives the 6 hours back.
Source: 14 CFR 91.409(b)
AM.II.D.K1 a2-037
Who may perform an annual inspection on a privately owned single-engine airplane and approve it for return to service?
- Any mechanic with airframe and powerplant ratings
- A mechanic holding an inspection authorization
- The owner, if the owner holds a private pilot certificate
Show answer
Answer: B. Under 14 CFR 65.95 an annual inspection must be performed and approved by a mechanic holding an inspection authorization (or by an appropriately rated repair station or the manufacturer). A mechanic with A&P ratings but no IA may do a 100-hour inspection, not an annual. A pilot owner may do only listed preventive maintenance.
Source: 14 CFR 65.95; 14 CFR 91.409(a)
AM.II.D.K1 a2-038
A private owner pays a freelance flight instructor to give the owner instruction in the owner's own airplane. Under 14 CFR 91.409, does this use require 100-hour inspections?
- No, because the airplane is not provided by the person giving the instruction
- Yes, because the flight instruction is being given for hire
- Yes, because any airplane used for instruction needs 100-hour inspections
Show answer
Answer: A. The 100-hour requirement applies to an aircraft that carries a person for hire or that is provided by the person giving flight instruction for hire. Here the owner provides the airplane, so annual inspections are enough. The fact that the instructor is paid does not trigger the rule on its own.
Source: 14 CFR 91.409(b)
AM.II.D.K1 a2-039
A rental airplane on 100-hour inspections receives an annual inspection at 1,512 hours. When is the next 100-hour inspection due?
- At the old 100-hour due time, because the two inspections are tracked separately
- At 1,612 hours only if the annual was performed by a repair station
- At 1,612 hours, because the annual inspection may be used in place of a 100-hour
Show answer
Answer: C. An annual inspection covers the same scope and may substitute for a 100-hour inspection, so the 100-hour clock restarts at 1,512 hours. A 100-hour inspection cannot substitute for an annual, but the reverse is allowed. Who performs the annual makes no difference to that credit.
Source: 14 CFR 91.409(b)
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- Who can do an annual inspection?
- An IA holder, an appropriately rated repair station or the manufacturer. An A&P may do the 100-hour inspection within the rating (14 CFR 65.85, 65.87, 65.95).
- Are seat belts part of this area?
- Yes. S7 asks you to inspect a seat and seatbelt, including the TSO markings.
- Are these the real FAA questions?
- No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
- How many airframe inspection questions does Rivetry have?
- 45 reviewed items, 5 of them free.
Sources
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards (November 1, 2021). FAA. Read 2026-11-14.
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic ACS (with Changes 1 and 2, September 2024). FAA. Read 2026-11-14.
- FAA-H-8083-31B, Aviation Maintenance Technician Handbook: Airframe. FAA. Used to write the practice items 2026-11-14.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.