A&P electricity and electronics practice questions
Electricity and Electronics is ACS area AM.I.A of the FAA General (AMG) test, 5-15% of its 60 questions, so roughly 3 to 9 questions (FAA-G-ACS-1, chapter 3). The ACS lists 27 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.I.A.K1. Below are 6 free original questions from Rivetry's reviewed bank, with the explanation for each.
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-12); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
What does the ACS list for electricity and electronics?
Electricity and electronics is the General area with the longest ACS list, and the other mechanic tests lean on it: aircraft electrical systems (Airframe) and engine electrical and ignition (Powerplant) assume you can already read a circuit.
| Code | Knowledge element |
|---|---|
| AM.I.A.K1 | Electron theory (conventional flow vs. electron flow). |
| AM.I.A.K2 | Magnetism. |
| AM.I.A.K3 | Capacitance in a circuit. |
| AM.I.A.K4 | Inductance in a circuit. |
| AM.I.A.K5 | Alternating current (AC) electrical circuits. |
| AM.I.A.K6 | Direct current (DC) electrical circuits. |
| AM.I.A.K7 | Electrical laws and theory. |
| AM.I.A.K8 | Electrical measurement tools, principles, and procedures. |
| AM.I.A.K9 | Voltage. |
| AM.I.A.K10 | Current. |
| AM.I.A.K11 | Resistance. |
| AM.I.A.K12 | Power. |
| AM.I.A.K13 | Series circuits. |
| AM.I.A.K14 | Parallel circuits. |
| AM.I.A.K15 | Aircraft batteries. |
| AM.I.A.K16 | Transformers. |
| AM.I.A.K17 | Circuit continuity. |
| AM.I.A.K18 | Controlling devices, including switches and relays. |
| AM.I.A.K19 | Protective devices, including fuses, circuit breakers, and current limiters. |
| AM.I.A.K20 | Resistor types and color coding. |
| AM.I.A.K21 | Semiconductors, including diodes, transistors, and integrated circuits. |
| AM.I.A.K22 | Digital logic, including RAM, ROM, NVRAM, logic gates, inverter, rectifier, and flip flop. |
| AM.I.A.K23 | Binary numbers. |
| AM.I.A.K24 | Electrostatic discharge. |
| AM.I.A.K25 | Electrical circuit drawings. |
| AM.I.A.K26 | Complex/combined circuits. |
| AM.I.A.K27 | AC and DC motors. |
Source: FAA-S-ACS-1, area AM.I.A, read 2026-11-12. The written test draws on the knowledge elements. The ACS also lists 4 risk management and 14 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).
How many electricity and electronics questions will I get?
The FAA gives this area 5-15% of the AMG test. On 60 questions that is about 3 to 9 (our arithmetic on the FAA range). Rivetry has 60 reviewed items tagged AM.I.A, 6 of them free.
How should I study electricity and electronics?
- Own the laws the ACS names, Ohm's (V = I × R), Kirchhoff's and Watt's (P = I × V), and be able to solve for any variable.
- Resistances in series add; for parallel branches add the reciprocals, then invert. A parallel total must be smaller than the smallest branch, which is a quick check.
- Learn the schematic symbols the ACS lists under skill S9: grounds, shields, resistors, capacitors, fuses, circuit breakers, batteries, diodes, transistors and integrated circuits.
- Know battery types and hazards: the risk elements name lead acid, NiCad, lithium ion and gel cell.
Learn it from FAA-H-8083-30B, then test yourself.
Worked calculations for this area
- Series-parallel circuit AM.I.A.K26
Free mini quiz: 6 practice questions
6 free AM.I.A questions. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.I.A.K1 g1-001
Using electron flow theory, in which direction does current move through the external circuit connected to a battery?
- From the negative terminal, through the load, to the positive terminal
- From the positive terminal, through the load, to the negative terminal
- Out of both terminals toward the load, where the electrons are used up
Show answer
Answer: A. Electrons are repelled by the negative terminal and attracted to the positive one, so electron flow runs negative to positive through the load. Positive to negative is conventional flow, the opposite convention. Electrons are not consumed in the load; the same number return to the source.
Source: FAA-H-8083-30B, Fundamentals of Electricity and Electronics / Electron theory and current flow
AM.I.A.K1 g1-002
While reading a schematic, a technician notes that the arrowhead in a diode symbol points toward the bar. The arrowhead shows the direction of:
- Electron flow, from the negative side to the positive side
- Conventional current flow, which is opposite to electron flow
- The direction in which the diode blocks current
Show answer
Answer: B. Semiconductor symbols were drawn using conventional flow, so the arrow points from anode to cathode in the direction conventional current passes when forward biased. Electrons in that same diode move against the arrow, from cathode to anode. The diode blocks current in the reverse direction, not in the arrow direction.
Source: FAA-H-8083-30B, Fundamentals of Electricity and Electronics / Electron theory; semiconductor symbols
AM.I.A.K2 g1-003
Why is soft iron normally chosen as the core of an electromagnet such as a relay coil?
- It has high retentivity, so it keeps a strong field after the coil is de-energized
- It has high reluctance, so it concentrates the lines of flux inside the coil windings
- It has high permeability and low retentivity, so little magnetism remains
Show answer
Answer: C. Soft iron offers an easy path for flux (high permeability, low reluctance) and retains little residual magnetism, so the relay releases when the coil is de-energized. High retentivity is wanted in permanent magnets, not in a relay core. High reluctance would oppose flux and weaken the magnet.
Source: FAA-H-8083-30B, Fundamentals of Electricity and Electronics / Magnetism; permeability and retentivity
AM.I.A.K2 g1-004
A technician applies the left-hand rule to a coil, curling the fingers around it in the direction of electron flow. The extended thumb points toward the coil's:
- North pole
- South pole
- Positive supply terminal
Show answer
Answer: A. With the left hand and electron flow, the fingers follow electron flow around the turns and the thumb points to the north pole of the coil. The south pole is at the opposite end. The rule locates magnetic polarity, not electrical terminals, so the thumb says nothing about which lead is positive.
Source: FAA-H-8083-30B, Fundamentals of Electricity and Electronics / Electromagnetism; left-hand rule for coils
AM.I.A.K3 g1-005
Which change increases the capacitance of a parallel-plate capacitor?
- Increasing the distance between the plates
- Increasing the area of the plates
- Increasing the voltage applied to the plates
Show answer
Answer: B. Capacitance is directly proportional to plate area and the dielectric constant and inversely proportional to plate spacing. Moving the plates apart lowers capacitance. Raising the applied voltage increases the charge stored (Q = CV) but does not change the capacitance itself.
Source: FAA-H-8083-30B, Fundamentals of Electricity and Electronics / Capacitance; factors affecting capacitance
AM.I.A.K3 g1-006
A 10 microfarad capacitor and a 15 microfarad capacitor are connected in series. What is the total capacitance?
- 25 microfarads
- 12.5 microfarads
- 6 microfarads
Show answer
Answer: C. Capacitors in series combine like resistors in parallel: CT = (10 x 15) / (10 + 15) = 150 / 25 = 6 microfarads. Adding them to get 25 microfarads is the rule for capacitors in parallel. Averaging them (12.5) follows no circuit law.
Source: FAA-H-8083-30B, Fundamentals of Electricity and Electronics / Capacitors in series and parallel
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- Is there a lot of math in this area?
- Some. Expect Ohm's and Watt's law arithmetic and series-parallel totals. The test allows an aviation or simple arithmetic calculator.
- Do I need to know digital logic?
- The ACS lists semiconductors, digital logic and binary numbers (K21 to K23), so expect at least recognition-level questions.
- Are these the real FAA questions?
- No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
- How many electricity and electronics questions does Rivetry have?
- 60 reviewed items, 6 of them free.
Sources
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards (November 1, 2021). FAA. Read 2026-11-12.
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic ACS (with Changes 1 and 2, September 2024). FAA. Read 2026-11-12.
- FAA-H-8083-30B, Aviation Maintenance Technician Handbook: General. FAA. Used to write the practice items 2026-11-12.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.