Weight and balance for the A&P test

Weight and balance is ACS area AM.I.C, 5 to 10% of the General (AMG) test (FAA-G-ACS-1). Nearly every question comes down to one idea: moment = weight × arm, and CG = total moment ÷ total weight, with arms measured from the datum (aft is positive). The rest is bookkeeping: subtract tare, handle fuel and oil, and convert to percent of MAC.

Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-11); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.

Which formulas do I need?

To findFormula
Momentmoment = weight × arm
Center of gravityCG = total moment ÷ total weight
Net scale weightnet = scale reading − tare
Mean aerodynamic chordMAC = TEMAC − LEMAC
CG in percent of MAC%MAC = (CG − LEMAC) ÷ MAC × 100
CG moved by shifting weightΔCG = weight shifted × distance shifted ÷ total weight
Ballast to bring CG inside a limitballast = empty weight × distance out of limits ÷ distance from ballast to desired CG

All from FAA-H-8083-1B, chapters 2, 3 and 7. A removed item takes its weight and its moment away; an item forward of the datum has a negative arm, so removing it adds moment.

What standard weights should I know?

The handbook's table gives avgas as 6.01 lb per US gallon and Jet A as 6.68 lb at 59 °F, and oil as 7.5 lb per gallon; its worked examples use 6 lb per gallon for avgas. For adverse-loading checks the handbook takes minimum fuel in pounds as METO horsepower ÷ 2 (with avgas at 6 lb per gallon), so a 230 hp engine gets 115 lb (FAA-H-8083-1B, chapters 3 and 7). Use the numbers a test question gives you over these.

How do I find empty-weight CG from scale readings?

A worked example with invented numbers. Datum at the nose. Nose scale reads 538 lb with a 12 lb chock; main scales read 1,021 and 1,017 lb with 9 lb chocks each. Nose arm 18.5 in, main arm 74.0 in.

PointNet weight (lb)Arm (in)Moment (lb-in)
Nose52618.59,731
Left main1,01274.074,888
Right main1,00874.074,592
Total2,546159,211

CG = 159,211 ÷ 2,546 = 62.53 in aft of the datum. Forgetting the tare gives a heavier airplane and a different CG, which is exactly the kind of wrong option the test offers.

What is an adverse-loading check?

It proves the CG cannot leave the envelope under the worst legal loading. For the forward check, load only what sits ahead of the forward limit at maximum, everything behind it at minimum, including minimum fuel; the aft check is the reverse (FAA-H-8083-1B, chapter 7). If a limit is exceeded, ballast or a placard fixes it.

Where can I practice the arithmetic?

Free mini quiz: 8 practice questions

Eight weight and balance questions (ACS area AM.I.C), from the datum to ballast. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.

  1. AM.I.C.K1 g2-001

    In weight and balance work, the datum is best described as:

    1. An imaginary vertical plane from which all horizontal arm measurements are taken
    2. The point about which the aircraft balances when it is loaded to maximum weight
    3. The leading edge of the mean aerodynamic chord, which every airplane uses as zero
    Show answer

    Answer: A. The datum is a fixed reference plane chosen by the manufacturer and given in the TCDS or weight and balance data; every arm is measured from it. The balance point is the CG, which moves as the load changes. Manufacturers put the datum at the nose, firewall, wing leading edge or elsewhere, so it is not always LEMAC.

    Source: FAA-H-8083-30B, Aircraft Weight and Balance / Datum and arm

  2. AM.I.C.K3 g2-008

    A tricycle-gear airplane is weighed. Scale readings: nose 412 lb, left main 856 lb, right main 852 lb. The nose wheel chock on the scale weighs 8 lb and each main wheel chock weighs 6 lb. What is the net weight of the airplane?

    1. 2,100 lb
    2. 2,120 lb
    3. 2,080 lb
    Show answer

    Answer: A. Total scale reading = 412 + 856 + 852 = 2,120 lb. Tare = 8 + 6 + 6 = 20 lb, so net weight = 2,120 - 20 = 2,100 lb. 2,120 lb forgets to remove the tare, and 2,080 lb subtracts the tare twice.

    Source: FAA-H-8083-30B, Aircraft Weight and Balance / Tare

  3. AM.I.C.K4 g2-011

    The datum is at the wing leading edge. The nose wheel, at -30.0 in, carries 360 lb; the main wheels, at +20.0 in, carry 1,440 lb combined. Where is the empty-weight CG?

    1. 22.0 in aft of the datum
    2. 10.0 in aft of the datum
    3. 10.0 in forward of the datum
    Show answer

    Answer: B. Moments: 360 x (-30) = -10,800 lb-in and 1,440 x 20 = +28,800 lb-in, for a net +18,000 lb-in. CG = 18,000 / 1,800 = +10.0 in, aft of the datum. 22.0 in comes from treating the nose moment as positive; 10.0 in forward reverses the sign of the result.

    Source: FAA-H-8083-30B, Aircraft Weight and Balance / Negative arms and moments

    Get Rivetry on Google Play

  4. AM.I.C.K4 g2-014

    An airplane's empty weight is 1,405 lb with a CG at +36.0 in. A mechanic removes a 20 lb radio at +60.0 in, installs a 10 lb radio at +60.0 in, and adds a 5 lb antenna at +140.0 in. What are the new empty weight and CG?

    1. 1,400 lb at +36.2 in
    2. 1,440 lb at +36.9 in
    3. 1,420 lb at +35.7 in
    Show answer

    Answer: A. Moment = 1,405 x 36 = 50,580 lb-in, minus 1,200, plus 600 and 700, giving 50,680 lb-in. Weight = 1,405 - 20 + 10 + 5 = 1,400 lb, so CG = 50,680 / 1,400 = +36.2 in. 1,440 lb at +36.9 in treats the removal as an addition, and 1,420 lb at +35.7 in leaves the removed radio's weight in the total.

    Source: FAA-H-8083-30B, Aircraft Weight and Balance / Equipment changes

  5. AM.I.C.K4 g2-015

    A 25 lb item is removed from station -15.0 (forward of the datum). What moment change should be entered in the weight and balance computation?

    1. -375 lb-in, because removing weight always reduces the total moment
    2. +375 lb-in, because a removal times a negative arm is positive
    3. Zero, because items forward of the datum do not affect empty moment
    Show answer

    Answer: B. A removal is entered as -25 lb, and -25 lb x -15 in = +375 lb-in, so the total moment becomes more positive and the CG moves aft. Assuming removals always lower the moment only holds for items aft of the datum. Items forward of the datum have negative moments that count like any other.

    Source: FAA-H-8083-30B, Aircraft Weight and Balance / Signs of weights, arms and moments

  6. AM.I.C.K4 g2-016

    An airplane's MAC is 64.0 in long, and LEMAC is at station 60.0. The loaded CG is at station 76.0. Where is the CG as a percentage of MAC?

    1. 25.0% MAC
    2. 21.1% MAC
    3. 26.7% MAC
    Show answer

    Answer: A. %MAC = (CG - LEMAC) / MAC x 100 = (76.0 - 60.0) / 64.0 x 100 = 16 / 64 x 100 = 25.0%. 21.1% divides the 16 in by the CG station (76) instead of the MAC length, and 26.7% divides it by the LEMAC station (60).

    Source: FAA-H-8083-30B, Aircraft Weight and Balance / Mean aerodynamic chord

  7. AM.I.C.K6 g2-020

    What is the most serious hazard of operating with the CG aft of the aft limit?

    1. Too little elevator authority to raise the nose for takeoff or the flare
    2. Structural overload of the nose gear during taxi, braking and hard landings
    3. Reduced longitudinal stability, making stall or spin recovery difficult
    Show answer

    Answer: C. An aft CG shortens the arm between the CG and the tail, so the airplane loses longitudinal stability and becomes very sensitive in pitch. It may be unable to recover from a stall or spin. Too little nose-up authority is a forward-CG problem, and an aft CG unloads the nose gear rather than overloading it.

    Source: FAA-H-8083-30B, Aircraft Weight and Balance / Effects of CG location

  8. AM.I.C.K9 g2-028

    An airplane weighs 1,800 lb with its CG at +66.5 in, 1.5 in forward of its +68.0 in forward limit. Ballast can be secured at station +158.0. What is the minimum ballast needed to bring the CG to the forward limit?

    1. 17.1 lb
    2. 39.7 lb
    3. 30.0 lb
    Show answer

    Answer: C. Ballast = aircraft weight x distance out of limits / distance from ballast to the limit = 1,800 x 1.5 / (158 - 68) = 2,700 / 90 = 30.0 lb. Check: (119,700 + 4,740) / 1,830 = +68.0 in. 17.1 lb divides by the ballast station (158) instead of 90, and 39.7 lb divides by the limit station (68).

    Source: FAA-H-8083-30B, Aircraft Weight and Balance / Ballast computation

Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.

Get Rivetry on Google Play

More questions

Is the datum always at the nose?
No. The manufacturer chooses it; it can be the nose, the firewall, the wing leading edge or a point ahead of the airplane. Arms aft of it are positive and arms forward of it negative.
Where are the CG limits found?
In the type certificate data sheet or the aircraft specification, and in the weight and balance data for the airplane (FAA-H-8083-1B, chapter 2).
Does the General test ask about helicopters?
The handbook covers helicopter weight and balance, including lateral CG. Practice the airplane method first; the arithmetic is the same.

Sources

Related guides

General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.