A&P aircraft instrument systems practice questions
Aircraft Instrument Systems is ACS area AM.II.H of the FAA Airframe (AMA) test, 5-10% of its 100 questions, so roughly 5 to 10 questions (FAA-G-ACS-1, chapter 3). The ACS lists 24 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.II.H.K1. Below are 5 sample original questions from Rivetry's reviewed bank, with the explanation for each.
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-14); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
What does the ACS list for aircraft instrument systems?
Aircraft instrument systems covers pressure, temperature and position instruments, gyros and compasses, pitot-static and vacuum systems, range markings, electronic displays and warning systems. With 24 knowledge elements it is one of the widest Airframe areas.
| Code | Knowledge element |
|---|---|
| AM.II.H.K1 | Annunciator indicating systems and the meaning of warning, caution, and advisory lights. |
| AM.II.H.K2 | Magnetic compass inspection and operation. |
| AM.II.H.K3 | Magnetic compass swinging procedures. |
| AM.II.H.K4 | Pressure indicating instruments. |
| AM.II.H.K5 | Temperature indicating instruments. |
| AM.II.H.K6 | Position indication sensors and instruments. |
| AM.II.H.K7 | Gyroscopic instruments. |
| AM.II.H.K8 | Direction indicating instruments. |
| AM.II.H.K9 | Instrument vacuum and pneumatic systems. |
| AM.II.H.K10 | Pitot-static system. |
| AM.II.H.K11 | Fuel quantity indicating systems. |
| AM.II.H.K12 | Instrument range markings. |
| AM.II.H.K13 | Electronic displays. |
| AM.II.H.K14 | Electrostatic sensitive devices. |
| AM.II.H.K15 | Built-in test equipment. |
| AM.II.H.K16 | Electronic flight instrument system. |
| AM.II.H.K17 | Engine indication and crew alerting system. |
| AM.II.H.K18 | Head-up displays (HUDs). |
| AM.II.H.K19 | 14 CFR parts 43 and 91 requirements for static system leak checks. |
| AM.II.H.K20 | Instrument limitations, conditions, and characteristics. |
| AM.II.H.K21 | Angle of attack and stall warning systems. |
| AM.II.H.K22 | Takeoff and landing gear configuration warning systems. |
| AM.II.H.K23 | Aircraft bonding and protection. |
| AM.II.H.K24 | Instrument or instrument panel removal and installation. |
Source: FAA-S-ACS-1, area AM.II.H, read 2026-11-14. The written test draws on the knowledge elements. The ACS also lists 5 risk management and 14 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).
How many aircraft instrument systems questions will I get?
The FAA gives this area 5-10% of the AMA test. On 100 questions that is about 5 to 10 (our arithmetic on the FAA range). Rivetry has 49 reviewed items tagged AM.II.H, 5 of them free.
How should I study aircraft instrument systems?
- Know what feeds each instrument: the airspeed indicator uses pitot and static pressure; the altimeter and vertical speed indicator use static only (K10).
- Range markings: a red radial line for limits, a green arc for the normal range, a yellow arc for caution, and on airspeed indicators a white arc for the flap range (K12).
- Altimeter and static system tests are required every 24 calendar months for aircraft flown under IFR in controlled airspace (14 CFR 91.411 and part 43 appendix E) (K19, S1).
- A mechanic may not repair or alter instruments (14 CFR 65.81). Removing and installing them is within the rating (K24, S2).
Learn it from FAA-H-8083-31B, then test yourself.
What could the practical ask me to do?
These are the 14 skill elements the ACS lists for AM.II.H. Any of them can become a project at the oral and practical, done with the references the examiner provides (Practical test projects by ACS area).
- S1 Perform a static system leak test.
- S2 Remove and install an instrument.
- S3 Install range marks on an instrument glass.
- S4 Determine barometric pressure using an altimeter.
- S5 Check for proper range markings on an instrument.
- S6 Inspect a magnetic compass.
- S7 Locate the procedures for troubleshooting a vacuum-operated instrument system.
- S8 Select proper altimeter for installation on a given aircraft.
- S9 Identify exhaust gas temperature system components.
- S10 Inspect a vacuum system filter for serviceability.
- S11 Adjust gyro/instrument air pressure/vacuum.
- S12 Inspect an aircraft's alternate air (static) source.
- S13 Locate and explain the adjustment procedures for a stall warning system.
- S14 Inspect outside air temperature gauge for condition and operation.
The risk management elements for this area: Use of pressurized air and water during maintenance or cleaning of aircraft instrument systems (R1); Actions in response to a reported intermittent warning or caution annunciator light illumination (R2); Performing maintenance on equipment identified as electrostatic-sensitive (R3); Handling of mechanical gyros or instruments containing mechanical gyros (R4); Performing a pitot/static system test (R5).
Free mini quiz: 5 practice questions
5 AM.II.H questions: 5 from the app's free set and 0 more as a sample. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.II.H.K2 a3-068
What is the purpose of the fluid in a magnetic compass?
- It damps card oscillation and partly floats the card to reduce pivot friction
- It keeps the compensating magnets from corroding in humid air
- It shields the magnets from the electrical fields of the aircraft wiring
Show answer
Answer: A. The compass liquid, a kerosene-type fluid, slows the card's swinging so it can be read and partly floats the card, reducing load and friction on the pivot. It has no effect on magnetic or electrical interference, which is corrected with the compensating magnets.
Source: FAA-H-8083-31B, Aircraft Instrument Systems / magnetic compass
AM.II.H.K3 a3-069
While swinging a compass, a mechanic removed the deviation on north with the N-S compensator. On a south heading the compass then reads 186 degrees. What should it be adjusted to read on south?
- Adjust it to read 180 degrees
- Adjust it to read 183 degrees
- Leave it reading 186 degrees
Show answer
Answer: B. After north is corrected, the error found on south (186 - 180 = 6 degrees) is split: the N-S compensator removes half of it, so the compass is adjusted to 186 - 3 = 183 degrees. Removing all 6 degrees on south would undo half of the north correction.
Source: FAA-H-8083-31B, Aircraft Instrument Systems / compass swinging
AM.II.H.K3 a3-070
Which setup is correct when swinging a compass?
- Airplane in its normal ground attitude, engine off, with only the master switch on
- Engine running, electrical equipment on, airplane in level-flight attitude
- Engine and all electrical equipment off to remove their magnetic interference
Show answer
Answer: B. A compass is swung under flight conditions: on a compass rose, in level-flight attitude, with the engine running and electrical and radio equipment operating, so their magnetic effects are included in the correction. Turning everything off leaves those deviations uncorrected in flight.
Source: FAA-H-8083-31B, Aircraft Instrument Systems / compass swinging
AM.II.H.K4 a3-071
An airplane is parked at a sea-level airport with the engine stopped. What should its manifold pressure gauge read?
- Zero, since the engine is producing no manifold pressure
- About 15 in. Hg, the typical value at idle
- About the local barometric pressure, near 30 in. Hg
Show answer
Answer: C. A manifold pressure gauge measures absolute pressure with a sealed aneroid, so with the engine stopped it reads ambient atmospheric pressure, close to 30 in. Hg at sea level. A zero reading would mean it measured gauge pressure, which it does not.
Source: FAA-H-8083-31B, Aircraft Instrument Systems / pressure measuring instruments
AM.II.H.K1 a3-067
During a ground check, a hydraulic pump LOW PRESSURE annunciator illuminates amber. Under the standard annunciator color convention, how should the amber indication be interpreted?
- A warning: a hazard that requires immediate corrective action
- An advisory: information that a normal system is operating or selected
- A caution: an abnormal condition that needs attention, not immediate action
Show answer
Answer: C. Under the alerting color convention in FAA-H-8083-31B and 14 CFR 25.1322, red marks a warning that needs immediate awareness and immediate response, amber or yellow marks a caution that needs immediate awareness and a subsequent response, and green shows safe operation; advisory and status lights use other colors such as white or blue. Some aircraft show certain low-pressure conditions in red, so always check the aircraft's own annunciator legend. This light is amber, so it is a caution.
Source: FAA-H-8083-31B, Aircraft Instrument Systems / annunciator systems; 14 CFR 25.1322
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- How is a compass swung?
- The aircraft is lined up on known headings, the compass compensators are adjusted, and the remaining errors go on a compass correction card (K3).
- Why handle gyro instruments carefully?
- Shock can damage the bearings of a mechanical gyro; handling is risk element R4.
- Are these the real FAA questions?
- No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
- How many aircraft instrument systems questions does Rivetry have?
- 49 reviewed items, 5 of them free.
Sources
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards (November 1, 2021). FAA. Read 2026-11-14.
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic ACS (with Changes 1 and 2, September 2024). FAA. Read 2026-11-14.
- FAA-H-8083-31B, Aviation Maintenance Technician Handbook: Airframe. FAA. Used to write the practice items 2026-11-14.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.