A&P airframe fire protection systems practice questions
Airframe Fire Protection Systems is ACS area AM.II.M of the FAA Airframe (AMA) test, 5-10% of its 100 questions, so roughly 5 to 10 questions (FAA-G-ACS-1, chapter 3). The ACS lists 7 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.II.M.K1. Below are 5 sample original questions from Rivetry's reviewed bank, with the explanation for each.
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-14); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
What does the ACS list for airframe fire protection systems?
Airframe fire protection covers fire classes and fire zones, overheat and fire detection, smoke and carbon monoxide detection, extinguishing agents and the systems that deliver them, and their inspection.
| Code | Knowledge element |
|---|---|
| AM.II.M.K1 | Types of fires and aircraft fire zones. |
| AM.II.M.K2 | Overheat and fire detection and warning systems. |
| AM.II.M.K3 | Overheat and fire detection system maintenance and inspection. |
| AM.II.M.K4 | Smoke and carbon monoxide detection systems. |
| AM.II.M.K5 | Fire extinguishing agents. |
| AM.II.M.K6 | Types of fire extinguishing systems. |
| AM.II.M.K7 | Fire extinguishing system maintenance and inspection requirements. |
Source: FAA-S-ACS-1, area AM.II.M, read 2026-11-14. The written test draws on the knowledge elements. The ACS also lists 3 risk management and 12 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).
How many airframe fire protection systems questions will I get?
The FAA gives this area 5-10% of the AMA test. On 100 questions that is about 5 to 10 (our arithmetic on the FAA range). Rivetry has 33 reviewed items tagged AM.II.M, 4 of them free.
How should I study airframe fire protection systems?
- Know the detector types: thermal switches, thermocouples and continuous loops (K2).
- Bottle pressure changes with temperature, so checking it means reading the chart for the ambient temperature (S2).
- Discharge cartridges (squibs) are explosive devices. Work on their circuits is a risk element (R1).
- Carbon monoxide detectors matter most on aircraft heated by an exhaust heat exchanger (K4, S5).
Learn it from FAA-H-8083-31B, then test yourself.
What could the practical ask me to do?
These are the 12 skill elements the ACS lists for AM.II.M. Any of them can become a project at the oral and practical, done with the references the examiner provides (Practical test projects by ACS area).
- S1 Troubleshoot an aircraft fire detection or extinguishing system.
- S2 Determine proper container pressure for an installed fire extinguisher system.
- S3 Identify maintenance procedures for fire detection and extinguishing system(s) and system component(s).
- S4 Inspect a smoke and toxic gas detection system.
- S5 Inspect a carbon monoxide detector.
- S6 Locate and explain the procedures for checking a smoke detection system.
- S7 Locate and explain the procedures for inspecting an overheat detection system.
- S8 Inspect fire protection system cylinders and check for hydrostatic test date.
- S9 Inspect fire detection/protection system.
- S10 Perform operational check of fire detection/protection system.
- S11 Inspect fire extinguishing agent bottle discharge cartridge.
- S12 Inspect a continuous-loop type fire detection system.
The risk management elements for this area: Maintenance on circuits associated with fire bottle squibs (R1); Use of PPEs when working on or testing fire extinguishing systems (R2); Fire extinguishing agents (R3).
Free mini quiz: 5 practice questions
5 AM.II.M questions: 4 from the app's free set and 1 more as a sample. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.II.M.K1 a5-022
A fire zone has a large mass of air flowing past aerodynamically clean obstructions, such as heat exchanger ducts and exhaust manifold shrouds. What is its classification?
- Class A
- Class C
- Class B
Show answer
Answer: C. Class B zones combine large airflow with aerodynamically clean obstructions, such as ducts and shrouds. Class A also has large airflow, but past regularly arranged obstructions like cylinders. Class C zones have relatively small airflow.
Source: FAA-H-8083-31B, Fire Protection Systems / Fire zones
AM.II.M.K1 a5-023
Seat cushions and paper in an airplane cabin are smoldering. How is this fire classified, and which agent works well on it?
- Class A; water, which cools and soaks the burning material
- Class B; only a carbon dioxide extinguisher may be used
- Class C; only a dry-chemical extinguisher may be used
Show answer
Answer: A. Ordinary combustibles such as fabric, paper, and cushions are Class A, and water is effective because it cools the fuel and soaks into smoldering material. Class B covers flammable liquids and Class C covers energized electrical equipment.
Source: FAA-H-8083-31B, Fire Protection Systems / Classes of fire; FAA-H-8083-30B, Safety, Ground Operations, and Servicing
AM.II.M.K2 a5-024
Many transport engine and APU fire detection systems use two sensing loops wired so that both must detect a fire before the warning is given. What is the main purpose?
- To reduce false fire warnings caused by a single faulty loop
- To detect a smaller fire sooner by doubling sensitivity
- To let one loop sense heat while the other senses smoke
Show answer
Answer: A. Requiring both loops to agree (AND logic) prevents one damaged or shorted loop from giving a false fire warning; if a loop faults, the system can usually be operated on the remaining loop. Both loops sense heat; neither one is a smoke detector, and the arrangement does not increase sensitivity.
Source: FAA-H-8083-31B, Fire Protection Systems / Dual-loop fire detection
AM.II.M.K1 a5-021
Overheat detection is being installed in a main landing gear wheel well, where there is very little airflow. Which fire zone classification describes this area?
- Class A
- Class D
- Class B
Show answer
Answer: B. A Class D zone has very little or no airflow, such as wing compartments and wheel wells. Class A zones have large airflow past regularly arranged obstructions (such as a reciprocating engine's power section), and Class B zones have large airflow past aerodynamically clean obstructions.
Source: FAA-H-8083-31B, Fire Protection Systems / Fire zones
AM.II.M.K2 a5-025
Which behavior is a desirable feature of an aircraft fire detection system?
- It latches the warning on until maintenance resets the controller
- It warns for as long as the fire exists and clears when the fire is out
- It gives a warning only after the crew presses the test switch
Show answer
Answer: B. A good detection system gives a continuous warning for the duration of a fire and clears when the fire is out, so the crew can tell whether the fire has been extinguished or has reignited. A latched warning would hide that information.
Source: FAA-H-8083-31B, Fire Protection Systems / Fire detection system requirements
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- Which extinguishing agents are covered?
- K5 lists fire extinguishing agents. The FAA Airframe handbook covers halogenated agents, carbon dioxide and others, and which class of fire each suits.
- How is this different from engine fire protection?
- Engine fire protection (AM.III.E) is a Powerplant area about engine fire zones. This area covers the whole airframe, including cabin and cargo smoke detection.
- Are these the real FAA questions?
- No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
- How many airframe fire protection systems questions does Rivetry have?
- 33 reviewed items, 4 of them free.
Sources
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards (November 1, 2021). FAA. Read 2026-11-14.
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic ACS (with Changes 1 and 2, September 2024). FAA. Read 2026-11-14.
- FAA-H-8083-31B, Aviation Maintenance Technician Handbook: Airframe. FAA. Used to write the practice items 2026-11-14.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.