A&P metallic structures practice questions
Metallic Structures is ACS area AM.II.A of the FAA Airframe (AMA) test, 5-15% of its 100 questions, so roughly 5 to 15 questions (FAA-G-ACS-1, chapter 3). The ACS lists 17 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.II.A.K1. Below are 7 free original questions from Rivetry's reviewed bank, with the explanation for each.
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-12); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
What does the ACS list for metallic structures?
Metallic structures covers sheet metal repair from defect to finished rivet row, plus flame and inert-gas welding. It is one of the Airframe areas with the widest range, and it mixes vocabulary with layout arithmetic.
| Code | Knowledge element |
|---|---|
| AM.II.A.K1 | Inspection/testing of metal structures. |
| AM.II.A.K2 | Types of sheet metal defects. |
| AM.II.A.K3 | Selection of sheet metal repair materials. |
| AM.II.A.K4 | Layout, forming, and drilling of sheet metal components. |
| AM.II.A.K5 | Selection of rivets, hardware, and fasteners for a sheet metal repair. |
| AM.II.A.K6 | Heat treatment processes for aluminum. |
| AM.II.A.K7 | Rivet layout. |
| AM.II.A.K8 | Rivet removal and installation methods. |
| AM.II.A.K9 | Maintenance safety practices/precautions for sheet metal repairs or fabrications. |
| AM.II.A.K10 | Flame welding gases. |
| AM.II.A.K11 | Storage/handling of welding gases. |
| AM.II.A.K12 | Flame welding practices and techniques. |
| AM.II.A.K13 | Inert-gas welding practices and techniques. |
| AM.II.A.K14 | Purpose and types of shielding gases. |
| AM.II.A.K15 | Types of steel tubing welding repairs. |
| AM.II.A.K16 | Procedures for weld repairs. |
| AM.II.A.K17 | Types of structures and their characteristics. |
Source: FAA-S-ACS-1, area AM.II.A, read 2026-11-12. The written test draws on the knowledge elements. The ACS also lists 5 risk management and 14 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).
How many metallic structures questions will I get?
The FAA gives this area 5-15% of the AMA test. On 100 questions that is about 5 to 15 (our arithmetic on the FAA range). Rivetry has 63 reviewed items tagged AM.II.A, 7 of them free.
How should I study metallic structures?
- Practice layout arithmetic: bend allowance and setback (K4) and rivet layout (K7) both have a worked workup here.
- Know how to select rivets, hardware and fasteners for a repair (K5) and how rivets are removed and installed (K8).
- Learn the heat treatment processes for aluminum (K6) as a sequence with a purpose for each step.
- Welding gas handling and storage (K10, K11) is a safety topic; read the ACS risk elements on compressed gas bottles with it.
Learn it from FAA-H-8083-31B, then test yourself.
Worked calculations for this area
- Bend allowance and flat length AM.II.A.K4
- Rivet selection and layout AM.II.A.K7
Free mini quiz: 7 practice questions
7 free AM.II.A questions. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.II.A.K2 a1-007
Damage to a stringer is too extensive to repair with a patch. The mechanic cuts out the damaged section and splices in a matching piece of stringer. This damage is classified as:
- Damage repairable by patching
- Damage necessitating replacement of parts
- Damage repairable by insertion
Show answer
Answer: C. When an area is too large to patch, the damaged section is removed and a matching section is inserted and spliced in. That is damage repairable by insertion. Replacement of parts means the whole part has to be replaced, which this repair avoids.
Source: FAA-H-8083-31B, Aircraft Metal Structural Repair / Classification of damage
AM.II.A.K3 a1-008
Compared with bare 2024-T3 sheet of the same thickness, Alclad 2024-T3 sheet has:
- Better corrosion resistance and slightly lower strength
- Better corrosion resistance and higher strength from the cladding
- The same strength and lower corrosion resistance than bare sheet
Show answer
Answer: A. Alclad has a thin layer of pure aluminum bonded to each surface. The layer protects the core from corrosion, but pure aluminum is much weaker than the alloy, so the sheet as a whole is slightly weaker than bare sheet of equal thickness. The cladding adds no strength.
Source: FAA-H-8083-30B, Materials and Processes / Aluminum alloys; clad aluminum
AM.II.A.K1 a1-001
Which nondestructive inspection method can reveal only those discontinuities that are open to the surface of the part?
- Eddy current inspection
- Dye penetrant inspection
- Ultrasonic pulse-echo inspection
Show answer
Answer: B. Penetrant works only by seeping into a defect that breaks the surface and bleeding back out into the developer, so a closed internal flaw stays invisible. Eddy current can detect flaws slightly below the surface, and ultrasonic inspection is used for internal discontinuities.
Source: FAA-H-8083-30B, Inspection Concepts and Techniques / Liquid penetrant inspection
AM.II.A.K1 a1-002
A mechanic must inspect a 2024-T3 aluminum landing gear attach bracket for cracks. Which NDI method is NOT usable on this part?
- Magnetic particle inspection
- Eddy current inspection
- Fluorescent dye penetrant inspection
Show answer
Answer: A. Magnetic particle inspection needs a ferromagnetic material that can be magnetized; aluminum is nonmagnetic, so no leakage field forms at a crack. Eddy current only needs an electrically conductive part, which aluminum is, and penetrant works on any nonporous material.
Source: FAA-H-8083-30B, Inspection Concepts and Techniques / Magnetic particle inspection
AM.II.A.K1 a1-004
After a fire near an aluminum wing panel, which NDI method can check whether the alloy's heat-treated condition was changed by the heat?
- Eddy current conductivity testing
- Magnetic particle inspection
- Fluorescent penetrant inspection
Show answer
Answer: A. Overheating changes the temper of an aluminum alloy, and that changes its electrical conductivity, which an eddy current conductivity meter can measure and compare to the correct value. Penetrant finds only surface cracks, not a change in temper, and magnetic particle does not work on aluminum.
Source: FAA-H-8083-30B, Inspection Concepts and Techniques / Eddy current inspection
AM.II.A.K2 a1-005
When an inspector examines a bushing that slides in a fitting, they find particles of the softer metal torn loose and welded onto the harder surface. This damage is called:
- Burnishing
- Brinelling
- Galling
Show answer
Answer: C. Galling is the breakdown of mating surfaces from too much friction during relative motion, with metal from the softer part torn off and welded to the harder one. Burnishing is a polishing of one surface by sliding contact, with no metal removed or displaced, and brinelling is a shallow round dent from a high load.
Source: FAA-H-8083-31B, Aircraft Metal Structural Repair / Types of damage and defects
AM.II.A.K2 a1-006
A sheet metal part has a small notch on its edge where metal was pushed aside, with little or no metal removed. This defect is a:
- Nick
- Gouge
- Score
Show answer
Answer: A. A nick is a local notch or break on an edge, usually from metal being displaced rather than removed. A gouge is a groove in the surface from contact with a foreign object under heavy pressure, and a score is a deep scratch on a surface, not a notch on an edge.
Source: FAA-H-8083-31B, Aircraft Metal Structural Repair / Types of damage and defects
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- Are rivet formulas on the test?
- The ACS lists rivet layout (K7) and rivet selection (K5). The rivet layout workup shows the arithmetic from the FAA handbook.
- Does this area include composites?
- No. Non-metallic structures, including composites, are a separate area, AM.II.B.
- Are these the real FAA questions?
- No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
- How many metallic structures questions does Rivetry have?
- 63 reviewed items, 7 of them free.
Sources
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards (November 1, 2021). FAA. Read 2026-11-12.
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic ACS (with Changes 1 and 2, September 2024). FAA. Read 2026-11-12.
- FAA-H-8083-31B, Aviation Maintenance Technician Handbook: Airframe. FAA. Used to write the practice items 2026-11-12.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.