A&P turbine engines practice questions
Turbine Engines is ACS area AM.III.B of the FAA Powerplant (AMP) test, 5-10% of its 100 questions, so roughly 5 to 10 questions (FAA-G-ACS-1, chapter 3). The ACS lists 11 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.III.B.K1. Below are 7 free original questions from Rivetry's reviewed bank, with the explanation for each.
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-12); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
What does the ACS list for turbine engines?
Turbine engines covers how a gas turbine works, how it is built, how its performance is monitored, and what to do after installation or when performance drops.
| Code | Knowledge element |
|---|---|
| AM.III.B.K1 | Turbine engine operating principles/theory of operation. |
| AM.III.B.K2 | Types of turbine engines. |
| AM.III.B.K3 | Turbine engine construction and internal components. |
| AM.III.B.K4 | Turbine engine performance and monitoring. |
| AM.III.B.K5 | Turbine engine troubleshooting, maintenance, and inspection procedures. |
| AM.III.B.K6 | Procedures required after the installation of a turbine engine. |
| AM.III.B.K7 | Causes for turbine engine performance loss. |
| AM.III.B.K8 | Bleed air systems. |
| AM.III.B.K9 | Storage and preservation. |
| AM.III.B.K10 | Auxiliary power unit(s). |
| AM.III.B.K11 | Turbine engine adjustment and testing. |
Source: FAA-S-ACS-1, area AM.III.B, read 2026-11-12. The written test draws on the knowledge elements. The ACS also lists 4 risk management and 13 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).
How many turbine engines questions will I get?
The FAA gives this area 5-10% of the AMP test. On 100 questions that is about 5 to 10 (our arithmetic on the FAA range). Rivetry has 68 reviewed items tagged AM.III.B, 7 of them free.
How should I study turbine engines?
- Learn the section order and what each section does to pressure, temperature and velocity before memorizing names.
- Study performance monitoring and the causes of performance loss (K4, K7) from the handbook, with the symptom each produces.
- The ACS lists bleed air systems (K8) and auxiliary power units (K10) in this area, so they are not only in the air systems area.
- After installing an engine, adjustment and testing (K6, K11) follow the manufacturer's sequence; learn the order the handbook gives.
Learn it from FAA-H-8083-32B, then test yourself.
Free mini quiz: 7 practice questions
7 free AM.III.B questions. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.III.B.K1 p1-060
At which point in a typical turbojet engine is gas pressure highest?
- At the turbine inlet
- At the diffuser outlet, ahead of the combustors
- In the exhaust cone, just ahead of the propelling nozzle
Show answer
Answer: B. Pressure rises through the compressor and the diffuser, which slows the air before it enters the combustor, so the diffuser outlet has the highest pressure. Temperature, not pressure, peaks in the combustor and turbine inlet, and the exhaust nozzle converts pressure into velocity.
Source: FAA-H-8083-32B, Aircraft Engines / Turbine engines / diffuser
AM.III.B.K1 p1-061
A turbojet in flight moves 64.4 lb of air per second. Air enters at 400 ft/s (aircraft speed) and leaves at 1,200 ft/s. Ignoring fuel flow, what net thrust is produced?
- 2,400 lb
- 1,600 lb
- 51,520 lb
Show answer
Answer: B. Net thrust = (W / g) x (V2 - V1) = (64.4 / 32.2) x (1,200 - 400) = 2 x 800 = 1,600 lb. Ignoring the inlet velocity gives gross thrust, 2 x 1,200 = 2,400 lb, and leaving out g treats weight as mass: 64.4 x 800 = 51,520.
Source: FAA-H-8083-32B, Aircraft Engines / Turbine engine thrust
AM.III.B.K1 p1-062
When gas flows at subsonic speed through a convergent duct, such as a turbine exhaust nozzle, what happens?
- Velocity decreases and pressure increases
- Velocity increases and pressure decreases
- Velocity and pressure both increase
Show answer
Answer: B. For subsonic flow, a narrowing duct speeds the gas up, and by Bernoulli's principle its static pressure drops; this is how the nozzle turns pressure into exit velocity. A divergent duct, such as the diffuser, does the opposite and slows the flow to raise pressure.
Source: FAA-H-8083-32B, Aircraft Engines / Turbine engines / ducts and Bernoulli's principle
AM.III.B.K1 p1-063
As hot gas passes through the turbine stages of a turbojet, what happens to its temperature and pressure?
- Both increase as the gas is accelerated
- Temperature decreases while pressure stays constant
- Both decrease as the turbine extracts energy
Show answer
Answer: C. The turbine takes energy from the gas to drive the compressor and accessories, so gas temperature and pressure fall across each stage. Nothing in the turbine adds energy, so they cannot rise, and pressure energy is converted along with heat energy.
Source: FAA-H-8083-32B, Aircraft Engines / Turbine section
AM.III.B.K2 p1-064
A turbofan moves a total of 600 lb of air per second, of which 100 lb/s passes through the core. What is its bypass ratio?
- 5:1
- 6:1
- 0.2:1
Show answer
Answer: A. Bypass ratio is the mass of air bypassing the core divided by the mass passing through it: bypassed air = 600 - 100 = 500 lb/s, and 500 / 100 = 5:1. Dividing total airflow by core flow gives 6:1, which wrongly counts the core air as bypass air.
Source: FAA-H-8083-32B, Aircraft Engines / Turbofan engines
AM.III.B.K2 p1-065
What is a key advantage of a free-turbine turboprop over a fixed-shaft turboprop?
- The propeller always turns at the same speed as the gas generator compressor
- It needs no reduction gearbox between the power turbine and propeller
- The starter turns only the gas generator, so starting needs less power
Show answer
Answer: C. In a free-turbine engine the power turbine and propeller are not mechanically tied to the gas generator, so the starter does not have to turn the propeller. In a fixed-shaft engine the propeller and compressor are locked together, and both types still need a reduction gearbox.
Source: FAA-H-8083-32B, Aircraft Engines / Turboprop engines
AM.III.B.K1 p1-059
In the Brayton cycle used by gas turbine engines, combustion takes place at approximately constant:
- Volume
- Temperature
- Pressure
Show answer
Answer: C. In a turbine engine the air flows continuously through the combustor, where fuel is burned while the pressure stays nearly constant and the gas expands. Constant-volume combustion is the Otto cycle of a piston engine, where the charge is burned in a closed cylinder.
Source: FAA-H-8083-32B, Aircraft Engines / Turbine engines / Brayton cycle
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- Are turboprops covered here?
- Turbine engine types are in K2. Propeller control on a turbine engine, including reverse and beta range, is in the propellers area (AM.III.M.K5).
- Do I need to memorize numbers?
- Learn relationships and trends. Use the numbers a question gives you.
- Are these the real FAA questions?
- No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
- How many turbine engines questions does Rivetry have?
- 68 reviewed items, 7 of them free.
Sources
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards (November 1, 2021). FAA. Read 2026-11-12.
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic ACS (with Changes 1 and 2, September 2024). FAA. Read 2026-11-12.
- FAA-H-8083-32B, Aviation Maintenance Technician Handbook: Powerplant. FAA. Used to write the practice items 2026-11-12.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.