A&P engine lubrication systems practice questions
Engine Lubrication Systems is ACS area AM.III.G of the FAA Powerplant (AMP) test, 5-10% of its 100 questions, so roughly 5 to 10 questions (FAA-G-ACS-1, chapter 3). The ACS lists 7 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.III.G.K1. Below are 5 sample original questions from Rivetry's reviewed bank, with the explanation for each.
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-14); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
What does the ACS list for engine lubrication systems?
Engine lubrication systems covers oil types and grades, wet-sump and dry-sump systems, chip detectors, oil analysis and excessive oil consumption.
| Code | Knowledge element |
|---|---|
| AM.III.G.K1 | Types, grades, and uses of engine oil. |
| AM.III.G.K2 | Lubrication system operation and components. |
| AM.III.G.K3 | Wet-sump system. |
| AM.III.G.K4 | Dry-sump system. |
| AM.III.G.K5 | Chip detectors. |
| AM.III.G.K6 | Lubrication system maintenance, inspection, servicing, and analysis. |
| AM.III.G.K7 | Excessive aircraft engine oil consumption. |
Source: FAA-S-ACS-1, area AM.III.G, read 2026-11-14. The written test draws on the knowledge elements. The ACS also lists 3 risk management and 14 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).
How many engine lubrication systems questions will I get?
The FAA gives this area 5-10% of the AMP test. On 100 questions that is about 5 to 10 (our arithmetic on the FAA range). Rivetry has 44 reviewed items tagged AM.III.G, 5 of them free.
How should I study engine lubrication systems?
- A wet sump keeps the oil in the crankcase; a dry sump stores it in a separate tank and returns it with a scavenge pump (K3, K4).
- Use only the oils the manufacturer approves, and do not mix types (R1, R2).
- Chip detectors and filter checks find metal early, and oil analysis tracks trends (K5, K6).
- Know the causes of high oil consumption, such as worn rings or valve guides and external leaks (K7).
Learn it from FAA-H-8083-32B, then test yourself.
What could the practical ask me to do?
These are the 14 skill elements the ACS lists for AM.III.G. Any of them can become a project at the oral and practical, done with the references the examiner provides (Practical test projects by ACS area).
- S1 Inspect an oil cooler or oil lines.
- S2 Determine the correct type of oil for a specific engine.
- S3 Identify turbine engine oil filter bypass indicator.
- S4 Determine approved oils for different climatic temperatures.
- S5 Locate procedures for obtaining oil samples.
- S6 Inspect an oil filter or screen.
- S7 Perform oil pressure adjustment.
- S8 Identify oil system components.
- S9 Replace an oil system component.
- S10 Identify oil system flow.
- S11 Troubleshoot an engine oil pressure malfunction.
- S12 Troubleshoot an engine oil temperature system.
- S13 Identify types of metal found in an oil filter.
- S14 Remove and inspect an engine chip detector.
The risk management elements for this area: Use or mixing of engine oils (R1); Following other than manufacturer's recommendations regarding the use of engine lubricants (R2); Handling, storage, and disposal of used lubricating oil (R3).
Free mini quiz: 5 practice questions
5 AM.III.G questions: 5 from the app's free set and 0 more as a sample. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.III.G.K1 p3-002
A cylinder-overhauled engine is about to begin break-in, and its manufacturer calls for straight mineral oil during break-in. Why is mineral oil used for this period instead of ashless dispersant oil?
- It cleans assembly lubricant out of the engine better than dispersant oil
- It has a higher viscosity index for the high temperatures of break-in
- It lets the new piston rings seat against the cylinder walls more readily
Show answer
Answer: C. Straight mineral oil is used until the rings seat and oil consumption stabilizes; the additives in ashless dispersant oil can slow ring seating. Dispersant oil, not mineral oil, is the one valued for keeping the engine clean, so the cleaning distractor reverses the two oils.
Source: FAA-H-8083-32B, Lubrication and Cooling Systems / Reciprocating engine oils, break-in
AM.III.G.K1 p3-003
What does it mean when an engine oil is described as having a high viscosity index?
- It resists oxidation and sludge formation at high temperatures
- It is thicker than other oils at every operating temperature
- Its viscosity changes relatively little as its temperature changes
Show answer
Answer: C. Viscosity index is a measure of how much an oil's viscosity changes with temperature; a high index means the oil thins and thickens less. It says nothing about how thick the oil is at a given temperature, and oxidation resistance is a separate property.
Source: FAA-H-8083-32B, Lubrication and Cooling Systems / Viscosity index
AM.III.G.K1 p3-004
Why do gas turbine engines use synthetic lubricating oil rather than petroleum-based oil?
- It resists breakdown and deposits when hot yet stays fluid in extreme cold
- It is a high-viscosity oil, which the high-speed ball and roller main bearings require
- It is gentler on rubber seals, paint and the skin of maintenance personnel than mineral oil
Show answer
Answer: A. Turbine synthetic oils stay stable at high bearing-compartment temperatures with little lacquer or coke, and they still flow at very low temperatures. They are low-viscosity oils, not high, and they can attack some rubbers, paint and skin, so the other two choices are reversed.
Source: FAA-H-8083-32B, Lubrication and Cooling Systems / Turbine engine oils
AM.III.G.K1 p3-005
An owner operating in a cold climate asks why the approved multiviscosity oil (such as a 15W-50) is listed for the engine. What is the main benefit?
- It flows more easily when cold but still holds an adequate film when hot
- It can be mixed with turbine synthetic oil when the usual oil is not available
- It removes the need to preheat the engine at any outside air temperature
Show answer
Answer: A. A multiviscosity oil behaves like a thinner oil when cold and a heavier oil when hot, so it reaches the bearings sooner at start-up while still protecting at operating temperature. It does not replace the preheat requirements in the engine manual, and it must never be mixed with turbine oil.
Source: FAA-H-8083-32B, Lubrication and Cooling Systems / Multiviscosity oils
AM.III.G.K1 p3-001
An engine manufacturer specifies SAE 50 oil. Which commercial aviation grade number is approximately equivalent?
- Grade 65
- Grade 50
- Grade 100
Show answer
Answer: C. Commercial aviation grade numbers run roughly twice the SAE number, so SAE 50 is about grade 100 and SAE 40 is about grade 80. Reading the numbers as equal (grade 50) is the common slip, and grade 65 matches SAE 30, an oil that is too thin for this engine.
Source: FAA-H-8083-32B, Lubrication and Cooling Systems / Aviation oil grades and viscosity
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- What does ashless dispersant oil do?
- It keeps contaminants suspended so the filter can catch them. Many piston engines use it after break-in; the engine manufacturer decides.
- What is a turbine oil filter bypass indicator?
- It shows that the filter clogged enough for oil to bypass it. Identifying it is skill element S3.
- Are these the real FAA questions?
- No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
- How many engine lubrication systems questions does Rivetry have?
- 44 reviewed items, 5 of them free.
Sources
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards (November 1, 2021). FAA. Read 2026-11-14.
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic ACS (with Changes 1 and 2, September 2024). FAA. Read 2026-11-14.
- FAA-H-8083-32B, Aviation Maintenance Technician Handbook: Powerplant. FAA. Used to write the practice items 2026-11-14.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.