A&P landing gear systems practice questions

Landing Gear Systems is ACS area AM.II.E of the FAA Airframe (AMA) test, 5-10% of its 100 questions, so roughly 5 to 10 questions (FAA-G-ACS-1, chapter 3). The ACS lists 13 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.II.E.K1. Below are 5 sample original questions from Rivetry's reviewed bank, with the explanation for each.

Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-14); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.

What does the ACS list for landing gear systems?

Landing gear systems covers fixed and retractable gear, struts, steering, position and warning systems, wheels, brakes, tires, anti-skid, and skis and floats. Much of it is servicing and inspection around high-pressure fluid and gas.

CodeKnowledge element
AM.II.E.K1Fixed and retractable landing gear systems.
AM.II.E.K2Fixed and retractable landing gear components.
AM.II.E.K3Landing gear strut servicing/lubrication.
AM.II.E.K4Inspection of bungee and spring steel landing gear systems.
AM.II.E.K5Steering systems.
AM.II.E.K6Landing gear position and warning system inspection, check, and servicing.
AM.II.E.K7Brake assembly servicing and inspection.
AM.II.E.K8Anti-skid system components and operation.
AM.II.E.K9Wheel, brake, and tire construction.
AM.II.E.K10Tire storage, care, and servicing.
AM.II.E.K11Landing gear and tire and wheel safety and inspection.
AM.II.E.K12Brake actuating systems.
AM.II.E.K13Alternative landing gear systems (e.g., skis, floats).

Source: FAA-S-ACS-1, area AM.II.E, read 2026-11-14. The written test draws on the knowledge elements. The ACS also lists 6 risk management and 29 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).

How many landing gear systems questions will I get?

The FAA gives this area 5-10% of the AMA test. On 100 questions that is about 5 to 10 (our arithmetic on the FAA range). Rivetry has 50 reviewed items tagged AM.II.E, 5 of them free.

How should I study landing gear systems?

Learn it from FAA-H-8083-31B, then test yourself.

What could the practical ask me to do?

These are the 29 skill elements the ACS lists for AM.II.E. Any of them can become a project at the oral and practical, done with the references the examiner provides (Practical test projects by ACS area).

The risk management elements for this area: Landing gear and tire and wheel practices/precautions (R1); Use of aircraft jacks (R2); High pressure fluids and gases (R3); Storage and handling of hydraulic fluids (R4); High pressure strut or system disassembly (R5); Operation of retractable landing gear systems around personnel (R6).

Free mini quiz: 5 practice questions

5 AM.II.E questions: 5 from the app's free set and 0 more as a sample. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.

  1. AM.II.E.K1 a2-064

    Why is a tailwheel (conventional gear) airplane more prone to ground looping than a tricycle-gear airplane?

    1. Its center of gravity is ahead of the main gear, so it noses over in a turn
    2. Its center of gravity is behind the main gear, so a swerve tends to increase
    3. Its tailwheel carries most of the weight and skids sideways easily
    Show answer

    Answer: B. With the CG aft of the main wheels, any swerve makes the CG try to pass the mains, which tightens the turn into a ground loop unless the pilot corrects. A tricycle airplane has its CG ahead of the mains, which tends to straighten a swerve. The tailwheel carries only a small part of the weight.

    Source: FAA-H-8083-31B, Aircraft Landing Gear Systems / Landing gear arrangement

  2. AM.II.E.K2 a2-065

    What is the primary function of the torque links (scissors) on an oleo strut?

    1. Keep the piston from rotating so the wheel stays aligned
    2. Absorb landing shock by forcing fluid through a small orifice
    3. Hold the gear down and locked after it has fully extended
    Show answer

    Answer: A. Torque links connect the cylinder to the piston so the piston can slide up and down but cannot rotate, which keeps the wheel aligned with the strut and the direction of travel. Shock absorption is done by fluid forced through the orifice and metering pin. Down-locking is the job of the drag brace and downlock mechanism.

    Source: FAA-H-8083-31B, Aircraft Landing Gear Systems / Shock struts / torque links

  3. AM.II.E.K2 a2-066

    In a hydraulic gear system with doors that close over the wheel wells, what component makes sure the doors are fully open before the gear starts to extend?

    1. A shuttle valve
    2. A priority valve
    3. A sequence valve
    Show answer

    Answer: C. A sequence valve, often opened mechanically by the moving door, directs fluid to the gear actuators only after the doors have reached the open position. A shuttle valve selects between normal and emergency fluid sources. A priority valve gives one system preference when pressure is low but does not sequence doors and gear.

    Source: FAA-H-8083-31B, Aircraft Landing Gear Systems / Retraction systems / sequence valves

    Get Rivetry on Google Play

  4. AM.II.E.K3 a2-067

    Before removing the air valve assembly or filler plug from an oleo strut to add fluid, what must the mechanic do first?

    1. Jack the aircraft so the strut extends fully
    2. Release all air pressure through the valve core
    3. Loosen the valve body two turns to bleed the air
    Show answer

    Answer: B. The air charge must be released completely through the valve core before the valve body is loosened; removing it under pressure can blow it out with great force. Fluid is then added with the strut fully compressed, not extended. Loosening the valve body to bleed air is exactly the unsafe practice to avoid.

    Source: FAA-H-8083-31B, Aircraft Landing Gear Systems / Servicing shock struts

  5. AM.II.E.K1 a2-063

    On a hydraulically retracted landing gear with a free-fall emergency extension system, what lowers the gear when the pilot pulls the emergency handle?

    1. The handle opens an accumulator that drives the actuators to the down position
    2. The handle starts a backup electric pump that powers the gear down
    3. The handle releases the uplocks, and gravity and air loads swing the gear down
    Show answer

    Answer: C. A free-fall system mechanically releases the uplocks (and often the door locks) so the gear drops by its own weight, helped by airflow and sometimes springs, until the downlocks engage. Accumulator or compressed-gas blowdown and auxiliary pumps are different emergency methods used on other designs.

    Source: FAA-H-8083-31B, Aircraft Landing Gear Systems / Emergency extension systems

Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.

Get Rivetry on Google Play

More questions

Why are tires filled with nitrogen?
Nitrogen is dry and inert, so pressure stays steadier and it does not feed a fire in an overheated wheel. Follow the manufacturer's servicing instructions.
Is jacking in this area?
Jacking the aircraft is a skill element here (S5). Jacking is also a General weight and balance element (AM.I.C.K10).
Are these the real FAA questions?
No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
How many landing gear systems questions does Rivetry have?
50 reviewed items, 5 of them free.

Sources

Related guides

General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.