A&P rotorcraft fundamentals practice questions
Rotorcraft Fundamentals is ACS area AM.II.N of the FAA Airframe (AMA) test, 5-10% of its 100 questions, so roughly 5 to 10 questions (FAA-G-ACS-1, chapter 3). The ACS lists 9 knowledge elements for it (more counting sub-items), and your test report names any you miss by code, like AM.II.N.K1. Below are 5 sample original questions from Rivetry's reviewed bank, with the explanation for each.
Last updated · Published by Certloom Learning · How this page was made: written from the official sources listed at the end (read on 2026-11-14); the quiz items come from Rivetry's bank, where every item was solved blind by a second reviewer and disagreements were fixed or dropped.
What does the ACS list for rotorcraft fundamentals?
Rotorcraft fundamentals covers helicopter aerodynamics, controls, transmissions, rotor systems and blades, vibration, track and balance, and skid gear inspection.
| Code | Knowledge element |
|---|---|
| AM.II.N.K1 | Rotorcraft aerodynamics. |
| AM.II.N.K2 | Flight controls. |
| AM.II.N.K3 | Transmissions. |
| AM.II.N.K4 | Rigging requirements for rotary wing aircraft. |
| AM.II.N.K5 | Design, type, and operation of rotor systems. |
| AM.II.N.K6 | Helicopter skid shoe and tube inspection. |
| AM.II.N.K7 | Rotor blade functions and construction. |
| AM.II.N.K8 | Rotor vibrations, track, and balance. |
| AM.II.N.K9 | Drive system vibrations and inspection. |
Source: FAA-S-ACS-1, area AM.II.N, read 2026-11-14. The written test draws on the knowledge elements. The ACS also lists 4 risk management and 4 skill elements, which the examiner checks at the oral and practical (The oral and practical (O&P) test).
How many rotorcraft fundamentals questions will I get?
The FAA gives this area 5-10% of the AMA test. On 100 questions that is about 5 to 10 (our arithmetic on the FAA range). Rivetry has 38 reviewed items tagged AM.II.N, 4 of them free.
How should I study rotorcraft fundamentals?
- Know the controls: the collective changes the pitch of all main rotor blades together, the cyclic tilts the rotor disc, and the pedals change tail rotor pitch (K2).
- Rotor systems are fully articulated, semi-rigid or rigid. Learn what flapping, feathering and lead-lag mean for each (K5).
- Vibrations are sorted by frequency (low, medium, high), and each band points to different sources (K8, K9).
- Working around turning blades and ground handling are risk elements (R1, R2).
Learn it from FAA-H-8083-31B, then test yourself.
What could the practical ask me to do?
These are the 4 skill elements the ACS lists for AM.II.N. Any of them can become a project at the oral and practical, done with the references the examiner provides (Practical test projects by ACS area).
- S1 Locate components of a helicopter rotor system.
- S2 Locate helicopter rotor blade track and balance procedures.
- S3 Locate and explain procedures needed to rig helicopter controls.
- S4 Locate and explain procedures to track and balance a rotor system.
The risk management elements for this area: Working around helicopter blades during ground operations (R1); Ground-handling procedures (R2); Ground operations and functional tests (R3); Maintenance and inspection of rotorcraft systems and components (R4).
Free mini quiz: 5 practice questions
5 AM.II.N questions: 4 from the app's free set and 1 more as a sample. These are original Rivetry items from the reviewed bank of 1,792, not FAA test questions. Open each one to check your answer.
AM.II.N.K1 a5-046
A single main rotor helicopter tends to drift sideways while hovering. What causes this translating tendency?
- Gyroscopic precession of the main rotor
- The sideward thrust of the tail rotor
- Coriolis effect on the main rotor blades
Show answer
Answer: B. The tail rotor's thrust that counters torque also pushes the whole helicopter sideways, producing drift in the direction of tail rotor thrust. Designers offset it with mast tilt, rigging, or flight control system design, and the pilot uses slight cyclic. Precession and Coriolis effect are blade-level effects, not the cause of the drift.
Source: FAA-H-8083-21B, Aerodynamics of Flight / Translating tendency
AM.II.N.K1 a5-047
When a rotor blade flaps upward, it tends to accelerate in its plane of rotation. Why?
- Its center of mass moves closer to the mast, so it speeds up
- Its angle of attack increases, which adds forward thrust
- Gyroscopic precession shifts the lift force 90 degrees ahead
Show answer
Answer: A. As the blade flaps up its center of mass moves closer to the axis of rotation, and conservation of angular momentum makes it speed up (Coriolis effect). Fully articulated rotors use lead-lag hinges and dampers to absorb this motion. Flapping up actually reduces, not increases, angle of attack.
Source: FAA-H-8083-21B, Aerodynamics of Flight / Coriolis effect
AM.II.N.K1 a5-048
A helicopter with a fully articulated rotor begins rocking violently as it touches down, and a mechanic later finds one landing gear strut badly underserviced. What is this condition?
- Ground resonance, aggravated by improperly serviced gear
- Vortex ring state from settling into its own downwash
- Retreating blade stall caused by the rotor slowing down
Show answer
Answer: A. Ground resonance happens when the rotor's center of mass is thrown off by blades out of phase in lead-lag and that imbalance couples with the fuselage rocking on its gear. Incorrectly serviced struts, tires, or lead-lag dampers make it more likely. Vortex ring state is an in-flight descent condition.
Source: FAA-H-8083-21B, Helicopter Emergencies and Hazards / Ground resonance
AM.II.N.K1 a5-045
In forward flight the advancing blade has a higher airspeed than the retreating blade. What mainly equalizes lift across the rotor disc?
- The tail rotor adding extra thrust on the retreating side of the disc
- The lead-lag hinge letting the advancing blade swing aft and lose lift
- Blade flapping: the advancing blade rises and loses angle of attack
Show answer
Answer: C. Dissymmetry of lift is corrected by flapping. The advancing blade flaps up, which reduces its angle of attack, while the retreating blade flaps down and gains angle of attack, balancing lift. Lead-lag hinges relieve in-plane forces, and the tail rotor counters torque.
Source: FAA-H-8083-21B, Aerodynamics of Flight / Dissymmetry of lift
AM.II.N.K1 a5-049
A main rotor 32 feet in diameter turns at 400 rpm. What is the approximate blade tip speed?
- 670 feet per second
- 1,340 feet per second
- 335 feet per second
Show answer
Answer: A. Tip speed = pi x diameter x rpm / 60 = 3.1416 x 32 x 400 / 60 = 670 ft/s. Using the 32 ft diameter as the radius in 2 x pi x r gives 1,340 ft/s, and using the 16 ft radius in pi x D gives 335 ft/s.
Source: FAA-H-8083-21B, Aerodynamics of Flight / Rotor blade speed
Rivetry has 1,792 items like these for the General, Airframe and Powerplant tests, timed tests at the FAA length, and a figure bench that works every calculation step by step. Try the sample questions or open the free bench.
More questions
- Do I need helicopter experience to pass?
- No. The written questions draw on the rotorcraft material in the FAA Airframe handbook. Learn the terms and the vibration logic.
- Is track and balance on the practical?
- Locating and explaining track and balance procedures are skill elements (S2, S4).
- Are these the real FAA questions?
- No. The FAA does not publish its live test questions. These are original practice items tagged with the ACS code they practice.
- How many rotorcraft fundamentals questions does Rivetry have?
- 38 reviewed items, 4 of them free.
Sources
- FAA-S-ACS-1, Aviation Mechanic General, Airframe, and Powerplant Airman Certification Standards (November 1, 2021). FAA. Read 2026-11-14.
- FAA-G-ACS-1, Companion Guide to the Aviation Mechanic ACS (with Changes 1 and 2, September 2024). FAA. Read 2026-11-14.
- FAA-H-8083-31B, Aviation Maintenance Technician Handbook: Airframe. FAA. Used to write the practice items 2026-11-14.
Related guides
General study information, not legal advice. Rules and FAA documents change; confirm with the FAA (faa.gov, your Flight Standards District Office) before you act.